About Us Brands Contact FAQ Freight Payments Products Search Site Technical More Links...

B0.61h26 Isc
Miniature Bearings and Small Parts




We found 1 matching cross referenced part. Show me.

Category Matches

Springs Disc

TopHide Pictures

Washers - Disc Spring - Ball Bearing Type
Washers - Disc Spring - Ball Bearing Type

Search Rating: 100%

Also see combined categories:
All Disc Springs

Specially designed for preloading the outer ring of ball bearings. C1075 steel.

Ensures perfect bearing positioning with no sideways play. May be used to provide bearing preload. Load tolerance +/- 20% of load shown.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Washers - Disc Spring - Ball Bearing Type.

Washers - Disc Spring - Carbon Steel
Washers - Disc Spring - Carbon Steel

Search Rating: 100%

Also see combined categories:
All Disc Springs

Also known as belleville washers.

Manufactured under strict quality control to conform to DIN 2093.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Washers - Disc Spring - Carbon Steel.

Washers - Disc Spring - Flange Locking Type
Washers - Disc Spring - Flange Locking Type

Search Rating: 100%

Also see combined categories:
All Disc Springs

Used under the nuts or bolt head in bolted flange joints that are subject to thermal or mechanical shock.

The discs deflect and move with the bolted joint. Helps to compensate for loosening that may develop preventing damage and leaks caused by thermal expansion, contraction and shock. Made from 17.7 PH Stainless Steel. Temperature range minus 220 to +300o Celsius. Load tolerance +/- 20% of load shown.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Washers - Disc Spring - Flange Locking Type.

Washers - Disc Spring - Plastic
Washers - Disc Spring - Plastic

Search Rating: 100%

Also see combined categories:
All Disc Springs

Also known as belleville washers.

Not for constant spring forces or when high forces are needed. Provides flat spring characteristics and compensates for axial clearances and tolerances. Vibration dampening and noise reduction. Electrical and thermal insulation. Non magnetic - Polysorb(R) material.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Washers - Disc Spring - Plastic.

Washers - Disc Spring - Stainless Steel
Washers - Disc Spring - Stainless Steel

Search Rating: 100%

Also see combined categories:
All Disc Springs

Also known as belleville washers.

Manufactured under strict quality control to conform to DIN 2093.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Washers - Disc Spring - Stainless Steel.

Measuring Equipment

TopHide Pictures

Vernier and Disc Dial Sets
Vernier and Disc Dial Sets

Search Rating: 95%

Precision Engraved.

2024 Aluminium Black Anodized. Engraving filled with white enamel.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Vernier and Disc Dial Sets.

Batteries

TopHide Pictures

Batteries - Accessories
Batteries - Accessories

Search Rating: 89%

Miscellaneous battery accessories - Lipo safety charge sacks - Balancers - Leads - Battery Monitors - Etc

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Batteries - Accessories.

Linear Slides

TopHide Pictures

Slides - Drawer - Front Disconnect - Friction - 19mm Ext
Slides - Drawer - Front Disconnect - Friction - 19mm Ext

Search Rating: 89%

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted two member slide. Friction brake allows drawer to come to a slow stop. Front disconnects by pulling firmly on the drawer until it releases. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Slides - Drawer - Front Disconnect - Friction - 19mm Ext.

Slides - Drawer - Front Disconnect - Friction - 19mm Ext - Undercarriage
Slides - Drawer - Front Disconnect - Friction - 19mm Ext - Undercarriage

Search Rating: 89%

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Undercarriage mounted two member slide. Friction brake allows drawer to come to a slow stop. Only one required per drawer. Requires 16 M4 or 8 Gauge Pan Head Screws (not included). Shipped with a bracket and two plastic tracks.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Slides - Drawer - Front Disconnect - Friction - 19mm Ext - Undercarriage.

Slides - Drawer - Front Disconnect - Latch Lever - Full Ext
Slides - Drawer - Front Disconnect - Latch Lever - Full Ext

Search Rating: 89%

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Front disconnects by pressing a drawer latch lever. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Slides - Drawer - Front Disconnect - Latch Lever - Full Ext.

Slides - Drawer - Front Disconnect - Lever - Full Ext
Slides - Drawer - Front Disconnect - Lever - Full Ext

Search Rating: 89%

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Front disconnects by lifting a lever lever. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Slides - Drawer - Front Disconnect - Lever - Full Ext.

Slides - Drawer - Quick Disconnect - Medium Duty - Full Ext
Slides - Drawer - Quick Disconnect - Medium Duty - Full Ext

Search Rating: 89%

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Positive stop slide with a quick disconnect.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Slides - Drawer - Quick Disconnect - Medium Duty - Full Ext.

Slides - Drawer - Stainless - Front Disconnect - Lever - 19mm Ext
Slides - Drawer - Stainless - Front Disconnect - Lever - 19mm Ext

Search Rating: 84%

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted two member slide. Positive locking mechanism keeps drawer locked in the open position until actively released. Front disconnects by pressing a drawer latch lever. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Slides - Drawer - Stainless - Front Disconnect - Lever - 19mm Ext.

Slides - Drawer - Stainless - No Disconnect - Heavy Duty - 19mm Ext
Slides - Drawer - Stainless - No Disconnect - Heavy Duty - 19mm Ext

Search Rating: 84%

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted two member slide. Positive stop slide that will not disconnect once installed. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Slides - Drawer - Stainless - No Disconnect - Heavy Duty - 19mm Ext.

Slides - Drawer - Stainless - No Disconnect - Heavy Duty - Full Ext
Slides - Drawer - Stainless - No Disconnect - Heavy Duty - Full Ext

Search Rating: 84%

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Positive stop slide that will not disconnect once installed.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Slides - Drawer - Stainless - No Disconnect - Heavy Duty - Full Ext.

Slides - Drawer - Stainless - No Disconnect - Medium Duty - 19mm Ext
Slides - Drawer - Stainless - No Disconnect - Medium Duty - 19mm Ext

Search Rating: 84%

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted two member slide. Positive stop slide that will not disconnect once installed. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Slides - Drawer - Stainless - No Disconnect - Medium Duty - 19mm Ext.

Slides - Drawer - Stainless - No Disconnect - Medium Duty - Full Ext
Slides - Drawer - Stainless - No Disconnect - Medium Duty - Full Ext

Search Rating: 84%

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Positive stop slide that will not disconnect once installed.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Slides - Drawer - Stainless - No Disconnect - Medium Duty - Full Ext.

Rod Ends

TopHide Pictures

Rod Ends - Steel - Studded - Quick Disconnect - Female
Rod Ends - Steel - Studded - Quick Disconnect - Female

Search Rating: 79%

Also see combined categories:
All Female Rod Ends with Stud

Joints are strength, quick disconnect assemblies with good wear characteristics. Retaining sleeve insures the assembly can only be put together with the sleeve positively aligned with the ball cavity. When spring is released, alignment is automatic thereby eliminating any possiblity of partial closure. Ball stud and Body are made of low carbon steel. Studs are surface hardened. All Parts are plated and dichromate treated.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Rod Ends - Steel - Studded - Quick Disconnect - Female.

Linear Slides

TopHide Pictures

Slides - Drawer - Medium Duty - Lever Disconnect
Slides - Drawer - Medium Duty - Lever Disconnect

Search Rating: 79%

Also see combined categories:
All Drawer Slides

Used for shallow drawers, tool chests and medical carts.

Hold in detent. Full extension. 12.7mm Side Space. Includes 32mm hole pattern as well as traditional hole pattern.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Slides - Drawer - Medium Duty - Lever Disconnect.

Motors Vibrating

TopHide Pictures

Motors - Vibrating - Pager
Motors - Vibrating - Pager

Search Rating: 68%

Also see combined categories:
All Vibrating Motors

Includes vibrating disc motor


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Motors - Vibrating - Pager.

Snaps

TopHide Pictures

Snaps - Spring - Interlocking - Style 1
Snaps - Spring - Interlocking - Style 1

Search Rating: 37%

Also see combined categories:
All Snaps

Plated formed steel. For quick connecting and disconnecting of cable, rope and chain assemblies.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Snaps - Spring - Interlocking - Style 1.

Cross Referenced Part Numbers

TopHide Pictures


SMR2-0.60-J5 ISC part number B0.6-1h26

Matches our part number
SMR2-0.60-J5
(Click item to order)

Description: ID (d): 0.600. OD (D): 2.000. Width (B): 0.800.

Group: Bearings - Ball - High Precision - 440C Stainless

Stock: Backorder  



Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  





Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top





Top



PRODUCTS

Angle Balls Bearings Acetal Bearings Angular C... Bearings Ball Bearings Conveyor Bearings Grooved P... Bearings Mounted Bearings PEEK Bearings and Housi... Bearings for Housings Belts PosiDrive Books Bushes Plastic Bushings Spherical Cam Followers Chain and Sprocket... Circlips Clutches Collars Couplings Helical ... Couplings Other Dental Bearing Kits Drylin Bearings an... Dual Eye Joints Dual Vee Bearings Gadgets Gear Racks Circula... Gear Racks Flexible Gearboxes Cross Axis Gearboxes Inline Gearboxes Inline E... Gearboxes Offset Gearboxes Right Angle Gearboxes Tee Gears Cluster Gears Imperial Ant... Gears Imperial Bevel Gears Imperial Hel...

Paypal Accepted
Paypal
Secure Checkout
See PAYMENTS


Gears Imperial Int... Gears Imperial Mitre Gears Imperial Racks Gears Imperial Spur Gears Metric AntiB... Gears Metric Bevel Gears Metric Helical Gears Metric Internal Gears Metric Mitre Gears Metric Racks Gears Metric Spira... Gears Metric Spira... Gears Metric Spur Gears Metric Stem Gears Metric Worms Housings with Inte... Keys and Keysteel Leadscrews Linear Slides Mounts Plate Nuts Nuts Lock Pinion Wire Imperial Pins General Pins Taper Plungers Ball Pulleys Flat Belt Ratchets and Pawls Rollers Screws Cap Head Screws Countersunk Screws Hex Head Screws Pan Head Screws Security Screws Socket Set ... Shafting Precision... Sheet Shim Spacers Spring Wire

Visa Card Accepted
Visa
Secure Checkout


Spur Gear Stock Im... Spur Gear Stock Me... Spur Gears Circula... Strip Stroke Rotary Bush... Surplus Stock Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Washers Finishing Washers Flat Metallic Washers Lock

Site Summary

Freight Rates
Terms and Conditions
Privacy Policy

Miniature Bearings and Small Parts offers 112503 products in 3013 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within USA and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings and Small Parts is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Miniature Bearings and Small Parts 1997. All rights reserved.