About Us Brands Contact FAQ Freight Payments Products Search Site Technical More Links...

Rollers Idler With Flanged Sintered Bearing Categories
Miniature Bearings and Small Parts


Category Matches

Rollers

TopHide Pictures

Rollers - Flanged
Rollers - Flanged

Search Rating: 49%

Also see combined categories:
All Rollers


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Rollers - Flanged.

Bearings Mounted

TopHide Pictures

Housings - Flanged - Self Aligning - Needle Roller
Housings - Flanged - Self Aligning - Needle Roller

Search Rating: 49%

Also see combined categories:
All Spyraflo Flange Mounted Bearings
All Spyraflo Mounted Bearings

Spyraflo robust light weight aluminium housing with self aligning needle roller bearings

See links at bottom of web page for more information. +/- 5% Static Alignment. Sintered aluminium housing. Corrosion Resistant. Light weight.

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Housings - Flanged - Self Aligning - Needle Roller.

Tensioners

TopHide Pictures

Tensioner - Fixed Flanged
Tensioner - Fixed Flanged

Search Rating: 45%

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Compact design allows mounting where space is limited.

Idler shaft and pulleys not included with tensioner.

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Tensioner - Fixed Flanged.

Tensioner - Drive - Adjustable Flanged
Tensioner - Drive - Adjustable Flanged

Search Rating: 45%

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. With flanged base that can be mounted in a tight area.

Idler shaft and pulleys not included with tensioner. Rotating arm gives operator 360o controlled tensioning. Serrated teeth to prevent slippage once tightened.

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Tensioner - Drive - Adjustable Flanged.

Bearings Mounted

TopHide Pictures

Housings - Flanged - Self Aligning - Bronze - Heavy Duty
Housings - Flanged - Self Aligning - Bronze - Heavy Duty

Search Rating: 33%

Also see combined categories:
All Spyraflo Flange Mounted Bearings
All Spyraflo Mounted Bearings

Spyraflo robust light weight aluminium housing with self aligning bronze bearings.

See links at bottom of web page for more information. +/- 5% Static Alignment. Sintered aluminium housing. Corrosion Resistant. Light weight.

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Housings - Flanged - Self Aligning - Bronze - Heavy Duty.

Bushes Bronze

TopHide Pictures

Bushes - Bronze - Sintered - Flanged
Bushes - Bronze - Sintered - Flanged

Search Rating: 33%

Also see combined categories:
All Bronze Bushes
All Flanged Bronze Bushes

Oil impregnated flanged sintered bronze bushes.

Precision items show an allowable Load Speed Rating in Newtons times RPM.

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Bushes - Bronze - Sintered - Flanged.

Bushes - Bronze - Sintered - Flanged - Oilite
Bushes - Bronze - Sintered - Flanged - Oilite

Search Rating: 33%

Also see combined categories:
All Bronze Bushes
All Flanged Bronze Bushes

Genuine Oilite flanged oil impregnated sintered bronze bushes.

Genuine Oilite Sintered Bronze designed to be fitted in H7 housings and f7 shafts. Static Load: 50N per mm Sq. Dynamic Load: 15N per mm sq. Rec Speed Range: 0.3 mtr per second to 0.5 mtr per second. Limit one Pv factor no greater than 1.8 Pv (Pv= N per mm sq x mtr per second).

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Bushes - Bronze - Sintered - Flanged - Oilite.

Bearings Mounted

TopHide Pictures

Housings - Flanged - Self Aligning - Heavy Duty - Delrin AF -tm-
Housings - Flanged - Self Aligning - Heavy Duty - Delrin AF -tm-

Search Rating: 32%

Also see combined categories:
All Spyraflo Flange Mounted Bearings
All Spyraflo Mounted Bearings

Spyraflo low profile self aligning flange mounted acetal Delrin AF bearings

See links at bottom of web page for more information. +/- 5% Static Alignment.

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Housings - Flanged - Self Aligning - Heavy Duty - Delrin AF -tm-.

Housings - Flanged - Self Aligning - Heavy Duty - Delrin -tm-
Housings - Flanged - Self Aligning - Heavy Duty - Delrin -tm-

Search Rating: 32%

Also see combined categories:
All Spyraflo Flange Mounted Bearings
All Spyraflo Mounted Bearings

Spyraflo low profile self aligning flange mounted acetal Delrin bearings

See links at bottom of web page for more information. +/- 5% Static Alignment.

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Housings - Flanged - Self Aligning - Heavy Duty - Delrin -tm-.

Housings - Flanged - Washdown
Housings - Flanged - Washdown

Search Rating: 32%

Also see combined categories:
All Spyraflo Flange Mounted Bearings
All Spyraflo Mounted Bearings

Spyraflo electroless nickel plated aluminum housing with self aligning Stainless Steel covered Acetal bearing.

See links at bottom of web page for more information. +/- 5% Static Alignment. Electroless nickel plated aluminium housing. Corrosion Resistant. Light weight.

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Housings - Flanged - Washdown.

Nuts

TopHide Pictures

Nuts - Flanged - Serrated - Stainless Steel
Nuts - Flanged - Serrated - Stainless Steel

Search Rating: 32%

Also see combined categories:
All Nuts

Stainless Steel.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Nuts - Flanged - Serrated - Stainless Steel.

Bushes Steel

TopHide Pictures

Bushes - Steel - DU - Split - Flanged
Bushes - Steel - DU - Split - Flanged

Search Rating: 32%

Also see combined categories:
All Steel Bushes
All Flanged Steel Bushes

Composite bearing material conisting of 3 bonded layers; Steel backing bonded with porous sintered bronze interlayer which is impregnated and overlaid with polytetrafluroethylene (PTFE).

Operating Temperature -200o to 280o Celsuis. Maximum Load 250N/mm2. Requires No lubrication, provides maintenance free operation. Exhibits low wear rate, Seizure resistant. High Static and Dynamic Load capacity, Good frictional properties with negligible stick-slip. Resists Solvents, Compact and light. No water Absorption, Electrically conductive and shows no electrostatic effects, Good embedability and is tolerant of dusty environments. Good embedability and is tolerant of dusty environments.

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Bushes - Steel - DU - Split - Flanged.

Bearings and Housings Insert Type

TopHide Pictures

Housings - Bearing - Flanged - 2 Bolt Hole - Aluminium
Housings - Bearing - Flanged - 2 Bolt Hole - Aluminium

Search Rating: 32%

Starting at 8mm bore size, aluminium silver series housings with removable chrome steel bearing


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Housings - Bearing - Flanged - 2 Bolt Hole - Aluminium.

Housings - Bearing - Flanged - 2 Bolt Hole - Cast Iron
Housings - Bearing - Flanged - 2 Bolt Hole - Cast Iron

Search Rating: 32%

Lubrication Groove. Bearings sold separately. Larger sizes available on request. Use with steel bearing inserts for cast iron housings.

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Housings - Bearing - Flanged - 2 Bolt Hole - Cast Iron.

Housings - Bearing - Flanged - 2 Bolt Hole - Plastic
Housings - Bearing - Flanged - 2 Bolt Hole - Plastic

Search Rating: 32%

Load and speed capability depend on the bearing used. Use with steel or plastic bearing inserts for plastic housings.

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Housings - Bearing - Flanged - 2 Bolt Hole - Plastic.

Housings - Bearing - Flanged - 2 Bolt Hole - Pressed Metal
Housings - Bearing - Flanged - 2 Bolt Hole - Pressed Metal

Search Rating: 32%

Bearings sold separately. Use with steel bearing inserts for pressed metal housings. Larger sizes available on request.

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Housings - Bearing - Flanged - 2 Bolt Hole - Pressed Metal.

Housings - Bearing - Flanged - 3 Bolt Bracket - Plastic
Housings - Bearing - Flanged - 3 Bolt Bracket - Plastic

Search Rating: 32%

Load and speed capability depend on the bearing used. Use with steel bearing inserts for plastic housings.

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Housings - Bearing - Flanged - 3 Bolt Bracket - Plastic.

Housings - Bearing - Flanged - 3 Bolt Hole - Pressed Metal
Housings - Bearing - Flanged - 3 Bolt Hole - Pressed Metal

Search Rating: 32%

Bearings sold separately. Use with steel bearing inserts for pressed metal housings. Larger sizes available on request.

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Housings - Bearing - Flanged - 3 Bolt Hole - Pressed Metal.

Housings - Bearing - Flanged - Offset - Cast Iron
Housings - Bearing - Flanged - Offset - Cast Iron

Search Rating: 32%

Lubrication Groove. Bearings sold separately. Larger sizes available on request. Use with steel bearing inserts for cast iron housings.

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Housings - Bearing - Flanged - Offset - Cast Iron.

Housings - Bearing - Flanged - Round - Cast Iron
Housings - Bearing - Flanged - Round - Cast Iron

Search Rating: 32%

Lubrication Groove. Bearings sold separately. Larger sizes available on request. Use with steel bearing inserts for cast iron housings.

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Housings - Bearing - Flanged - Round - Cast Iron.

Housings - Bearing - Flanged - Square - Cast Iron
Housings - Bearing - Flanged - Square - Cast Iron

Search Rating: 32%

Lubrication Groove. Bearings sold separately. Larger sizes available on request. Use with steel bearing inserts for cast iron housings.

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Housings - Bearing - Flanged - Square - Cast Iron.

Bearings Ball

TopHide Pictures

Bearings - Ball - Flanged - 440C Stainless
Bearings - Ball - Flanged - 440C Stainless

Search Rating: 32%

Also see combined categories:
All Radial Ball Bearings
All Flanged Ball Bearings

Stainless Steel Bearings with Flanges.

Single row radial ball bearings with flanges. Not all Bearings are readily available. Please enquire. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Bearings - Ball - Flanged - 440C Stainless.

Bearings - Ball - Flanged - Chrome Steel
Bearings - Ball - Flanged - Chrome Steel

Search Rating: 32%

Also see combined categories:
All Radial Ball Bearings
All Flanged Ball Bearings

Chrome Steel Bearings with Flanges.

Single row radial ball bearings with flanges. Not all Bearings are readily available. Please enquire. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Bearings - Ball - Flanged - Chrome Steel.

Bearings - Ball - Flanged - High Precision - 440C Stainless
Bearings - Ball - Flanged - High Precision - 440C Stainless

Search Rating: 32%

Also see combined categories:
All Radial Ball Bearings
All Flanged Ball Bearings

Stainless Steel Bearings with Flanges - Abec 5 and Abec 7.

Single row radial ball bearings with flanges. Not all bearings are readily available. Please enquire. True high precision bearings are not recommended for skates or fishing reels. High precision bearings are used in accurately balanced application such as spindles, gyros and medical equipment. If your application is not of a precision nature, standard bearings may be more suitable (and less expensive).

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Bearings - Ball - Flanged - High Precision - 440C Stainless.

Bearings - Ball - Flanged - WIR - 440C Stainless
Bearings - Ball - Flanged - WIR - 440C Stainless

Search Rating: 32%

Also see combined categories:
All Radial Ball Bearings
All Flanged Ball Bearings with Extended Inner

Stainless Steel Bearings with Flanges.

Single row radial ball bearings with flanges and extended inner rings (wide inner rings). Not all Bearings are readily available. Please enquire. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Bearings - Ball - Flanged - WIR - 440C Stainless.

Bearings - Ball - Flanged - WIR - Chrome Steel
Bearings - Ball - Flanged - WIR - Chrome Steel

Search Rating: 32%

Also see combined categories:
All Radial Ball Bearings
All Flanged Ball Bearings with Extended Inner

Chrome Steel Bearings with Flanges.

Single row radial ball bearings with flanges and extended inner rings (wide inner rings). Not all Bearings are readily available. Please enquire. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Bearings - Ball - Flanged - WIR - Chrome Steel.

Bearings - Ball - Flanged - WIR - High Precision - 440C Stainless
Bearings - Ball - Flanged - WIR - High Precision - 440C Stainless

Search Rating: 32%

Also see combined categories:
All Radial Ball Bearings
All Flanged Ball Bearings with Extended Inner

Stainless Steel Bearings with Flanges - Abec 5 and Abec 7.

Single row radial ball bearings with flanges and extended inner rings (wide inner rings). Not all bearings are readily available. Please enquire. True high precision bearings are not recommended for skates or fishing reels. High precision bearings are used in accurately balanced application such as spindles, gyros and medical equipment. If your application is not of a precision nature, standard bearings may be more suitable (and less expensive).

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Bearings - Ball - Flanged - WIR - High Precision - 440C Stainless.

Bearings Pivot

TopHide Pictures

Bearings - Pivot - Flanged
Bearings - Pivot - Flanged

Search Rating: 32%

Also see combined categories:
All Pivot Bearings


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Bearings - Pivot - Flanged.

Cam Followers

TopHide Pictures

Cam Followers - Flanged Stud Type
Cam Followers - Flanged Stud Type

Search Rating: 32%

Also see combined categories:
All Cam Followers


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Cam Followers - Flanged Stud Type.

Housings with Integral Bearing

TopHide Pictures

Housings - Bearing - Flanged - 2 Bolt Hole - W300
Housings - Bearing - Flanged - 2 Bolt Hole - W300

Search Rating: 32%

Also see combined categories:
All Housings with Integral Bearing

With integral self aligning plain bearing.

Housing: Igumid G. Ball: Highly wear resistant Iglidur W300.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Housings - Bearing - Flanged - 2 Bolt Hole - W300.

Housings - Bearing - Flanged - Miniature - Self Aligning
Housings - Bearing - Flanged - Miniature - Self Aligning

Search Rating: 32%

Also see combined categories:
All Housings with Integral Bearing

Spyraflo pressed steel housings incorporating Abec 3 bearings in a special seat allowing for +/- 5 Deg Misalignment. Improves performance and reduces manufacturing costs. Simplify designs.

Small and cost effective. All bore sizes are mounted in the same size housing for ease of design and cost efficiency. High precision bearings pre-mounted with a 5o misalignment capability. 40,000 RPM recommended maximum speed with testing. 27kgf radial static capacity, 54kgf radial dynamic capacity per bearing. RoHS, REACH and SVHC environmental compliant.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Housings - Bearing - Flanged - Miniature - Self Aligning.

Housings - Bearing - Flanged - Square - W300
Housings - Bearing - Flanged - Square - W300

Search Rating: 32%

Also see combined categories:
All Housings with Integral Bearing

With integral self aligning plain bearing.

Housing : Igumid G. Ball : Highly wear resistant Iglidur W300. Temperature range -40 oC to +180 oC.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Housings - Bearing - Flanged - Square - W300.

Locking Assemblies

TopHide Pictures

Assemblies - Locking - Flanged
Assemblies - Locking - Flanged

Search Rating: 32%

Also see combined categories:
All Locking Assemblies

Suitable for locking sprockets, pulleys, eccentric shafts.

Locks components with a bore of (D) to shafts with a diameter of (d). C60 Steel (060A62). Outer ring expands whilst inner ring contracts. Flange eliminates axial movement of secured component. During tightening of the screws, the hub must be able to perform axial movement. Clearance h8 / H8. Surface roughness Rt max 10um shaft / hub.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Assemblies - Locking - Flanged.

Shock Absorbers

TopHide Pictures

Shock Absorbers - Flanged Stop Collars
Shock Absorbers - Flanged Stop Collars

Search Rating: 32%

Also see combined categories:
All Shock Absorbers


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Shock Absorbers - Flanged Stop Collars.

Bushes Bronze

TopHide Pictures

Bushes - Aluminium Bronze - Flanged
Bushes - Aluminium Bronze - Flanged

Search Rating: 32%

Also see combined categories:
All Bronze Bushes
All Flanged Bronze Bushes

Used for dies, moulds and heavy machinery. C95400 Aluminium bronze.

ID and OD Tolerance : -0.0000 / +0.0127. Length Tolerance : -1.524 / +0.000.

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Bushes - Aluminium Bronze - Flanged.

Pins - Ball Lock

TopHide Pictures

Pins - Ball Lock - Flanged Receptacles
Pins - Ball Lock - Flanged Receptacles

Search Rating: 32%

Provide a permanent and proper mating hole for commercial and industrial type quick release ball lock pins.

Designed to be used on materials or in applications where the pin does not have anything to lock against. Pin does not protrude past the bottom of the receptacle so they are ideal for blind hole applications. 303 Stainless Steel. Mounted with screws, rivets or bolts. The quick release ball lock pins are inserted from the flanged end, and the ball extends into the wider opening at the top of the receptacle.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Pins - Ball Lock - Flanged Receptacles.

Leadscrews

TopHide Pictures

Leadscrew Nuts - Metric - Flanged - Plastic
Leadscrew Nuts - Metric - Flanged - Plastic

Search Rating: 32%

Also see combined categories:
All Leadscrew Nuts
All Metric Leadscrew Nuts

Trapezoidal thread design. Use with metric leadscrew thread listed in separate category.

Material: Iglidur W300. Single Start / Right Hand.

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Leadscrew Nuts - Metric - Flanged - Plastic.

Bearings Angular Contact

TopHide Pictures

Bearings - Ball - Angular Contact - Flanged - 440C Stainless
Bearings - Ball - Angular Contact - Flanged - 440C Stainless

Search Rating: 32%

Also see combined categories:
All Angular Contact Bearings

Single row angular contact ball bearings with flanges.

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Bearings - Ball - Angular Contact - Flanged - 440C Stainless.

Bushes Bronze

TopHide Pictures

Bushes - Bronze - Dri-Plane - Flanged
Bushes - Bronze - Dri-Plane - Flanged

Search Rating: 32%

Also see combined categories:
All Bronze Bushes
All Flanged Bronze Bushes

Bronze bearings with a graphite-based dry lubricant built in.

Doesnt require oil or grease for lubrication, therefore, cleaner with no out gassing, can operate between -34 to 371 oC.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Bushes - Bronze - Dri-Plane - Flanged.

Bushes Plastic

TopHide Pictures

Bushes - Plastic - Clip - Double Flanged
Bushes - Plastic - Clip - Double Flanged

Search Rating: 32%

Also see combined categories:
All Plastic Bushes
All Flanged Plastic Bushes

For use with sheet metal. Used as a light duty split bearing.

Low clearance. Maintenance free. Economical. High Precision. High wear resistance. Light weight. M250 Polymer minus 40 oC to 80 oC (minus 40 Deg F to 176 Deg F).


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Bushes - Plastic - Clip - Double Flanged.

Bushes - Plastic - Ertalyte TX - Flanged
Bushes - Plastic - Ertalyte TX - Flanged

Search Rating: 32%

Also see combined categories:
All Plastic Bushes
All Flanged Plastic Bushes

Self lubricated, high mechanical strength, stiffness and hardness.

Specific Gravity 1.44 g/cm3. Operating Temp 115 C / 5000 hrs - 100 C / 20000 hrs. Tensile Strength 76 Mpa. Hardness 94 Rockwell M. High mechanical strength, stiffness and hardness. Self lubricating.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Bushes - Plastic - Ertalyte TX - Flanged.

Bushes - Plastic - Iglidur A200 - Flanged
Bushes - Plastic - Iglidur A200 - Flanged

Search Rating: 32%

Also see combined categories:
All Plastic Bushes
All Flanged Plastic Bushes

Food grade for low speeds and direct contact with food and pharmaceuticals.

Specific Gravity 1.14 g/cm3. Operating Temp 170 C short term / 80 C long term. Tensile Strength at 20 oC = 116 Mpa. Hardness 81 Shore D (DIN53505). Bushing bore tolerances is D11 after H7 Pressfit. Tolerances listed in the tables take this into account.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Bushes - Plastic - Iglidur A200 - Flanged.

Bushes - Plastic - Iglidur A290 - Flanged
Bushes - Plastic - Iglidur A290 - Flanged

Search Rating: 32%

Also see combined categories:
All Plastic Bushes
All Flanged Plastic Bushes

Food grade for low speeds and direct contact with food and pharmaceuticals.

Specific Gravity 1.39 g/cm3. Operating Temp 180 C short term / 140 C long term. Tensile Strength at 20 oC = 250 Mpa. Hardness 88 Shore D (DIN53505). Bushing bore tolerances is D11 after H7 Pressfit. Tolerances listed in the tables take this into account.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Bushes - Plastic - Iglidur A290 - Flanged.

Bushes - Plastic - Iglidur F - Flanged
Bushes - Plastic - Iglidur F - Flanged

Search Rating: 32%

Also see combined categories:
All Plastic Bushes
All Flanged Plastic Bushes

Electrically conductive. High Compressive Strength. High Temp. Resistant to Chemicals.

Specific Gravity 1.25 g/cm3. Operating Temp 180 C short term / 140 C long term. Tensile Strength at 20 oC = 260 Mpa. Hardness 84 Shore D (DIN53505). Bushing bore tolerances is D11 after H7 Pressfit. Tolerances listed in the tables take this into account.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Bushes - Plastic - Iglidur F - Flanged.

Bushes - Plastic - Iglidur G - Flanged
Bushes - Plastic - Iglidur G - Flanged

Search Rating: 32%

Also see combined categories:
All Plastic Bushes
All Flanged Plastic Bushes

General purpose maintenance free dry running.

Specific Gravity 1.45 g/cm3. Operating Temp 220 C short term / 130 C long term. Tensile Strength at 20 oC 210 Mpa. Hardness 81 Shore D (DIN53505). Bushing bore tolerances is E10 after H7 Pressfit. Tolerances listed in the tables take this into account.

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Bushes - Plastic - Iglidur G - Flanged.

Bushes - Plastic - Iglidur H370 - Flanged
Bushes - Plastic - Iglidur H370 - Flanged

Search Rating: 32%

Also see combined categories:
All Plastic Bushes
All Flanged Plastic Bushes

Underwater. High Temp. Chemical Resistant. High mechanical loading and wear resistance.

Specific Gravity 1.60 g/cm3. Operating Temp 240 C short term / 200 C long term. Tensile Strength at 20 oC = 135 Mpa. Hardness 82 Shore D (DIN53505). Bushing bore tolerances is F10 after H7 Pressfit. Tolerances listed in the tables take this into account.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Bushes - Plastic - Iglidur H370 - Flanged.

Bushes - Plastic - Iglidur H - Flanged
Bushes - Plastic - Iglidur H - Flanged

Search Rating: 32%

Also see combined categories:
All Plastic Bushes
All Flanged Plastic Bushes

Underwater performance. High Temp. Chemical Resistance.

Specific Gravity 1.64 g/cm3. Operating Temp 240 C short term / 200 C long term. Tensile Strength at 20 oC = 175 Mpa. Hardness 87 Shore D (DIN53505). Bushing bore tolerances is F10 after H7 Pressfit. Tolerances listed in the tables take this into account.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Bushes - Plastic - Iglidur H - Flanged.

Bushes - Plastic - Iglidur J - Flanged
Bushes - Plastic - Iglidur J - Flanged

Search Rating: 32%

Also see combined categories:
All Plastic Bushes
All Flanged Plastic Bushes

Low Wear - Dry Running - Vibration Dampening - Chemical Resistance.

Specific Gravity 1.49 g/cm3. Operating Temp 120 C short term / 90 C long term. Tensile Strength at 20 oC = 73 Mpa. Hardness 74 Shore D (DIN53505). Bushing bore tolerances is E10 after H7 Pressfit. Tolerances listed in the tables take this into account.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Bushes - Plastic - Iglidur J - Flanged.

Bushes - Plastic - Iglidur M250 - Flanged
Bushes - Plastic - Iglidur M250 - Flanged

Search Rating: 32%

Also see combined categories:
All Plastic Bushes
All Flanged Plastic Bushes

For impact resistance vibration dampening unclean environments.

Specific Gravity 1.14 g/cm3. Operating Temp 170 C short term / 80 C long term. Tensile Strength at 20 oC = 112 Mpa. Hardness 79 Shore D (DIN53505). Bushing bore tolerances is D11 after H7 Pressfit. Tolerances listed in the tables take this into account.

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Bushes - Plastic - Iglidur M250 - Flanged.

Bushes - Plastic - Iglidur P - Flanged
Bushes - Plastic - Iglidur P - Flanged

Search Rating: 32%

Also see combined categories:
All Plastic Bushes
All Flanged Plastic Bushes

Low water absorption. Low wear. Hgh load.

Specific Gravity 1.47 g/cm3. Operating Temp 200 C short term / 130 C long term. Tensile Strength at 20 oC = 120 Mpa. Hardness 75 Shore D (DIN53505). Bushing bore tolerances is E10 after H7 Pressfit. Tolerances listed in the tables take this into account.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Bushes - Plastic - Iglidur P - Flanged.

Bushes - Plastic - Iglidur Q - Flanged
Bushes - Plastic - Iglidur Q - Flanged

Search Rating: 32%

Also see combined categories:
All Plastic Bushes
All Flanged Plastic Bushes

Excellent wear resistance under high load. Resistant to dirt.

Specific Gravity 1.40 g/cm3. Operating Temp 155 C short term / 135 C long term. Tensile Strength at 20 oC = 120 Mpa. Hardness 83 Shore D (DIN53505). Bushing bore tolerances is E10 after H7 Pressfit. Tolerances listed in the tables take this into account.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Bushes - Plastic - Iglidur Q - Flanged.

Bushes - Plastic - Iglidur W300 - Flanged
Bushes - Plastic - Iglidur W300 - Flanged

Search Rating: 32%

Also see combined categories:
All Plastic Bushes
All Flanged Plastic Bushes

Low co-efficient of friction. High wear resistance. Chemical resistant.

Specific Gravity 1.24 g/cm3. Operating Temp 180 C short term / 90 C long term. Tensile Strength at 20 oC = 125 Mpa. Hardness 77 Shore D (DIN53505). Bushing bore tolerances is E10 after H7 Pressfit. Tolerances listed in the tables take this into account.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Bushes - Plastic - Iglidur W300 - Flanged.

Bushes - Plastic - Iglidur X - Flanged
Bushes - Plastic - Iglidur X - Flanged

Search Rating: 32%

Also see combined categories:
All Plastic Bushes
All Flanged Plastic Bushes

Very high temperature. Extreme chemical resistance. High compressive strength. Low water absorption.

Specific Gravity 1.44 g/cm3. Operating Temp 315 C short term / 250 C long term. Tensile Strength at 20 oC = 170 Mpa. Hardness 85 Shore D (DIN53505). Bushing bore tolerances is F10 after H7 Pressfit. Tolerances listed in the tables take this into account.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Bushes - Plastic - Iglidur X - Flanged.

Bushes - Plastic - Iglidur Z - Flanged
Bushes - Plastic - Iglidur Z - Flanged

Search Rating: 32%

Also see combined categories:
All Plastic Bushes
All Flanged Plastic Bushes

High temperature. High thermal resistance. Extreme load. High surface speed.

Specific Gravity 1.40 g/cm3. Operating Temp 310 C short term / 250 C long term. Tensile Strength at 20 oC = 95 Mpa. Hardness 81 Shore D (DIN53505). Bushing bore tolerances is F10 after H7 Pressfit. Tolerances listed in the tables take this into account.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Bushes - Plastic - Iglidur Z - Flanged.

Bushes - Plastic - Rulon J - Flanged
Bushes - Plastic - Rulon J - Flanged

Search Rating: 32%

Also see combined categories:
All Plastic Bushes
All Flanged Plastic Bushes

Max Load: 5.2 MPa (750 psi). Gold colour. Max surface speed: 2m/s. Max PV: 0.26 (Mpa x m/s)

Non Metallic Bushes. Excellent insulator. Nor suitable for steam or wet conditions. Not FDA compliant. Suitable for dry conditions or vacuum. 288 oC (550 Deg F) Maximum Working Temperature. Patented all polymeric PTFE compound which operates well against soft mating surfaces. Lowest co-efficient of friction in the Rulon(R) product range.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Bushes - Plastic - Rulon J - Flanged.

Bushes - Plastic - X-Lube - Flanged
Bushes - Plastic - X-Lube - Flanged

Search Rating: 32%

Also see combined categories:
All Plastic Bushes
All Flanged Plastic Bushes

Self lubricating - low friction - non-corrosive - light weight - chemical resistant.

Molybdenum Disulphide filled Nylon 6. Pricing is highly quantity dependant. Please enquire. Note! X-Lube bushes are moulded to nominal tolerances for non critical applications. You will need to machine these bushes to obtain better tolerances and finish.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Bushes - Plastic - X-Lube - Flanged.

Bushes Steel

TopHide Pictures

Bushes - Steel - DP4 - Split - Flanged
Bushes - Steel - DP4 - Split - Flanged

Search Rating: 32%

Also see combined categories:
All Steel Bushes
All Flanged Steel Bushes

Wear resistant helping to prevent wear deposits in the lubricating oil after long working periods. Designed for use in oil pumps and dampers.

Operating Temperature -200o to 280o Celsius. Maximum load 250N/mm2. Low static and dynamic friction coefficient, Suitable for sliding, oscillating, reiprocating and rotating applications. High reistance to be cavitation and flow erosion damage of the polymer bearing surface by the lubricant, Excellent wear resistant. Also suitable for use with non-lubricating fluids and in light duty unlubricated applications, Lead free.

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Bushes - Steel - DP4 - Split - Flanged.

Housings - Linear with Bearings

TopHide Pictures

Housings - Linear - Thomson Super Flanged
Housings - Linear - Thomson Super Flanged

Search Rating: 32%

Also see combined categories:
All Linear Bearing Housings
All Linear Bearing Housings With Bearing

Includes Bearings.

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Housings - Linear - Thomson Super Flanged.

Ball Transfers

TopHide Pictures

Ball Transfer Units - Spring Loaded - Flanged - Zinc Plated
Ball Transfer Units - Spring Loaded - Flanged - Zinc Plated

Search Rating: 31%

Single ball bearings units for conveyor systems

Case: Zinc plated Mild Steel. Ball: Carbon Steel 60-66 HRC. Applications: - Guillotines - Presses - Moulding machines - Base of machines for easy handling - Press brakes - Shock loading.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Ball Transfer Units - Spring Loaded - Flanged - Zinc Plated.

Bushes Bronze

TopHide Pictures

Bushes - Aluminium Bronze - Graphite Plug - Flanged
Bushes - Aluminium Bronze - Graphite Plug - Flanged

Search Rating: 31%

Also see combined categories:
All Bronze Bushes
All Flanged Bronze Bushes

Used for dies, moulds and heavy machinery. C95400 Aluminium bronze.

ID and OD Tolerance : -0.0000 / +0.0127. Length Tolerance : -1.524 / +0.000.

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Bushes - Aluminium Bronze - Graphite Plug - Flanged.

Bushes Steel

TopHide Pictures

Bushes - Stainless Steel and PTFE - Flanged
Bushes - Stainless Steel and PTFE - Flanged

Search Rating: 31%

Also see combined categories:
All Steel Bushes
All Flanged Steel Bushes

Oil, acid, alkali and salt water resistant. Contains no lead. Particularly suited to food applications, flow meters and pumps in pharmaceutical applications, printing machines chemical engineering and seawater applications.

Operating Temperature -200o to 280o Celsuis. PTFE with oilfibre 0.01 to around 0.03mm. Porous bronze 0.2 to around 0.3mm. Stainless steel backing 0.7 to around 2.3mm. 140 N/mm2 dynamic load rating. 250 N/mm2 static. 60 N/mm2 Oscillating.

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Bushes - Stainless Steel and PTFE - Flanged.

Thread Inserts

TopHide Pictures

Inserts - Expansion - Press In - Brass - Flanged
Inserts - Expansion - Press In - Brass - Flanged

Search Rating: 31%

Also see combined categories:
All Expansion Inserts

Use for cored or drilled holes in plastics. Designed to replace molded in inserts and threads in plastic casings. Also known as threaded inserts.

Material : Brass. Easiest inserts to install - simply push into a pre-moulded hole. Used with plastics or other materials. Material must be strong enough to withstand the expansion of the insert. The insertion of the screw locks the external knurls into the wall of the hole. Provides excellent thread durability. Not as strong as wind-in inserts.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Inserts - Expansion - Press In - Brass - Flanged.

Housings - Linear with Bearings

TopHide Pictures

Housings - Linear - Thomson Super Smart Flanged
Housings - Linear - Thomson Super Smart Flanged

Search Rating: 31%

Also see combined categories:
All Linear Bearing Housings
All Linear Bearing Housings With Bearing

Includes Bearings.

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Housings - Linear - Thomson Super Smart Flanged.

Thread Inserts

TopHide Pictures

Inserts - Expansion - Press In - 303 Stainless - Flanged
Inserts - Expansion - Press In - 303 Stainless - Flanged

Search Rating: 31%

Also see combined categories:
All Expansion Inserts

Use for cored or drilled holes in plastics. Designed to replace molded in inserts and threads in plastic casings. Also known as threaded inserts.

Material : 303 Stainless Steel. Easiest inserts to install - simply push into a pre-moulded hole. Used with plastics or other materials. Material must be strong enough to withstand the expansion of the insert. The insertion of the screw locks the external knurls into the wall of the hole. Provides excellent thread durability but where maximum strength is required other inserts shown in this catalogue should be preferred.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Inserts - Expansion - Press In - 303 Stainless - Flanged.

Inserts - Self Tapping - For Wood - Hex Drive - Flanged
Inserts - Self Tapping - For Wood - Hex Drive - Flanged

Search Rating: 31%

Also see combined categories:
All Self Tapping Inserts
All Self Tapping Inserts for Wood

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Die Cast Zinc Alloy. Knife thread cuts easily into a predrilled hole. Inexpensive inserts for use in ready to assemble furniture, drawer pulls etc. Installs with a hex wrench.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Inserts - Self Tapping - For Wood - Hex Drive - Flanged.

Linear Slides

TopHide Pictures

Rail Systems - Type 1 - Linear - Precision - Carriages - Flanged
Rail Systems - Type 1 - Linear - Precision - Carriages - Flanged

Search Rating: 31%

Also see combined categories:
All Type 1 Carriages and Rails

Match with rails by Size Column. With Lube Reservoir

Profile rail guides are used in the production of linear guidance systems with unlimited travel. They consist of a profile rail with 4 precision ground raceways and a slide usint with four ball circulation paths. The square configuration of the raceways results in a guidance system with good rigidity, capable of withstanding moment loads in all directions. The load carrying capacity is equal in all four directions. Low vibration and low noise. Case hardened steel. Supplied with a light preload. Lubricated with lithium based grease.

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Rail Systems - Type 1 - Linear - Precision - Carriages - Flanged.

Rollers

TopHide Pictures

Rollers - Idler - With Plain Sintered Bearing
Rollers - Idler - With Plain Sintered Bearing

Search Rating: 30%

Also see combined categories:
All Tyred OD Bearings
All Rollers

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Rollers - Idler - With Plain Sintered Bearing.

Ball Splines Linear

TopHide Pictures

Linear Ball Splines - Shaft
Linear Ball Splines - Shaft

Search Rating: 30%

Also see combined categories:
All Linear Ball Splines

Use with either flanged or unflanged Linear Ball Spline Bearings.

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Linear Ball Splines - Shaft.

Housings with Integral Bearing

TopHide Pictures

Housings - Bearing - Pillow Block - Nylon with Ertalyte Bearing
Housings - Bearing - Pillow Block - Nylon with Ertalyte Bearing

Search Rating: 30%

Also see combined categories:
All Housings with Integral Bearing

Flanged Ertalyte Bearing in Moulded Nylon 101 Housing.

Self-Lubricating. High Performance. Electrically Insulating.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Housings - Bearing - Pillow Block - Nylon with Ertalyte Bearing.

Chain and Sprockets Roller

TopHide Pictures

Sprockets - Idler
Sprockets - Idler

Search Rating: 29%

Also see combined categories:
All Sprockets for Roller Chain

Complete with Needle Roller or Ball Bearings. 3.75mm to 25.4mm pitch.

Can be used directly on shafts with a surface hardnes of RC 58 or higher. Can be run on hardened Inner Rings. See also Drive Tighteners. 12.7mm Bore models can be run directly on the drive tighteners.

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Sprockets - Idler.

Rollers

TopHide Pictures

Rollers - Durasoft - Shaft Mount - Black Neoprene
Rollers - Durasoft - Shaft Mount - Black Neoprene

Search Rating: 29%

Also see combined categories:
All Shaft Mount Durasoft Rollers

Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.

Designed for use in machines and assembly operations where part movement and protection is needed. Durasoft rollers have a gentle but firm touch. Unique shape of holes adds to their soft but resilient nature.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Rollers - Durasoft - Shaft Mount - Black Neoprene.

Rollers - Durasoft - Shaft Mount - Coloured Urethane
Rollers - Durasoft - Shaft Mount - Coloured Urethane

Search Rating: 29%

Also see combined categories:
All Shaft Mount Durasoft Rollers

Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.

Designed for use in machines and assembly operations where part movement and protection is needed. Durasoft rollers have a gentle but firm touch. Unique shape of holes adds to their soft but resilient nature. Blue colour may turn a shade of green when exposed to UV lighting.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Rollers - Durasoft - Shaft Mount - Coloured Urethane.

Rollers - Durasoft - Stud Mount - Black Neoprene
Rollers - Durasoft - Stud Mount - Black Neoprene

Search Rating: 29%

Also see combined categories:
All Stud Mount Durasoft Rollers

Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.

Designed for use in machines and assembly operations where part movement and protection is needed. Durasoft rollers have a gentle but firm touch. Unique shape of holes adds to their soft but resilient nature.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Rollers - Durasoft - Stud Mount - Black Neoprene.

Rollers - Durasoft - Stud Mount - Coloured Urethane
Rollers - Durasoft - Stud Mount - Coloured Urethane

Search Rating: 29%

Also see combined categories:
All Stud Mount Durasoft Rollers

Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.

Designed for use in machines and assembly operations where part movement and protection is needed. Durasoft rollers have a gentle but firm touch. Unique shape of holes adds to their soft but resilient nature. Blue colour may turn a shade of green when exposed to UV lighting.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Rollers - Durasoft - Stud Mount - Coloured Urethane.

Rollers - Solid - Shaft Mount - Black Neoprene
Rollers - Solid - Shaft Mount - Black Neoprene

Search Rating: 29%

Also see combined categories:
All Solid Shaft Mount Rollers

Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.

Designed for use in machines and assembly operations where part movement and protection is needed.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Rollers - Solid - Shaft Mount - Black Neoprene.

Rollers - Solid - Stud Mount - Black Neoprene
Rollers - Solid - Stud Mount - Black Neoprene

Search Rating: 29%

Also see combined categories:
All Solid Stud Mount Rollers

Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.

Designed for use in machines and assembly operations where part movement and protection is needed. Complete with washer and locknut. Free idling with ball bearings.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Rollers - Solid - Stud Mount - Black Neoprene.

Rollers - Solid - Stud Mount - Coloured Urethane
Rollers - Solid - Stud Mount - Coloured Urethane

Search Rating: 29%

Also see combined categories:
All Solid Stud Mount Rollers

Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.

Blue colour may turn a shade of green when exposed to UV lighting. Designed for use in machines and assembly operations where part movement and protection is needed. Complete with washer and locknut. Free idling with ball bearings.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Rollers - Solid - Stud Mount - Coloured Urethane.

Pulleys Idler

TopHide Pictures

Pulleys - Timing - Idler
Pulleys - Timing - Idler

Search Rating: 29%

Also see combined categories:
All Idler Pulleys

Complete with Needle Roller Bearing.

Can be used directly on shafts with a surface hardnes of RC 58 or higher. Can be run on hardened Inner Rings. See also Drive Tighteners. 12.7mm Bore models can be run directly on the drive tighteners.

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Pulleys - Timing - Idler.

Rollers

TopHide Pictures

Rollers - Durasoft - Finned - Stud Mount - Black Neoprene
Rollers - Durasoft - Finned - Stud Mount - Black Neoprene

Search Rating: 29%

Also see combined categories:
All Stud Mount Durasoft Rollers

Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.

Designed for use in machines and assembly operations where part movement and protection is needed. Durasoft rollers have a gentle but firm touch. Unique shape of holes adds to their soft but resilient nature.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Rollers - Durasoft - Finned - Stud Mount - Black Neoprene.

Rollers - Durasoft - Finned - Stud Mount - Coloured Urethane
Rollers - Durasoft - Finned - Stud Mount - Coloured Urethane

Search Rating: 29%

Also see combined categories:
All Stud Mount Durasoft Rollers

Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.

Designed for use in machines and assembly operations where part movement and protection is needed. Durasoft rollers have a gentle but firm touch. Unique shape of holes adds to their soft but resilient nature. Blue colour may turn a shade of green when exposed to UV lighting.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Rollers - Durasoft - Finned - Stud Mount - Coloured Urethane.

Rollers - Solid - Bonded to Steel Insert - Black Neoprene
Rollers - Solid - Bonded to Steel Insert - Black Neoprene

Search Rating: 29%

Also see combined categories:
All Solid Rollers with Insert

Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.

Designed for use in machines and assembly operations where part movement and protection is needed.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Rollers - Solid - Bonded to Steel Insert - Black Neoprene.

Rollers - Solid - Bonded to Steel Insert - Coloured Urethane
Rollers - Solid - Bonded to Steel Insert - Coloured Urethane

Search Rating: 29%

Also see combined categories:
All Solid Rollers with Insert

Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.

Designed for use in machines and assembly operations where part movement and protection is needed. Blue colour may turn a shade of green when exposed to UV lighting.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Rollers - Solid - Bonded to Steel Insert - Coloured Urethane.

Bearings for Housings

TopHide Pictures

Bearings - For Cast Iron Housings
Bearings - For Cast Iron Housings

Search Rating: 28%

Insert bearings with spherical OD for use with cast iron flanged and pillow block housings.

Grub Screw locking. Preferred misallignment of no more than 2o, but can accommodate up to 6o. Also available with eccentric locking collars on request. Lubrication Hole to match Lubrication groove in housing.

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Bearings - For Cast Iron Housings.

Bearings - For Pressed Metal Housings
Bearings - For Pressed Metal Housings

Search Rating: 28%

Insert bearings with spherical OD for use with pressed metal flanged and pillow block housings.

Grub Screw locking. Preferred misallignment of no more than 2o, but can accommodate up to 6o. Also available with eccentric locking collars on request.

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Bearings - For Pressed Metal Housings.

Enclosures

TopHide Pictures

Enclosures - Aluminium - Economy
Enclosures - Aluminium - Economy

Search Rating: 28%

Also see combined categories:
All Enclosures

Great little boxes ready for you to adapt to your mechanical projects.

Excellent screening properties for EMI and RFI. Ideal for projects subject to weather. Great housings for mechanical projects. Easy to machine. 380 Die Cast aluminium alloy BS1490 LM24. Close fitting flanged lids.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Enclosures - Aluminium - Economy.

Bearings Mounted

TopHide Pictures

Housings - Flange Mount - Non Aligning - Needle Roller
Housings - Flange Mount - Non Aligning - Needle Roller

Search Rating: 21%

Also see combined categories:
All Spyraflo Flange Mounted Bearings
All Spyraflo Mounted Bearings

Low profile flange mounted needle roller bearings

See links at bottom of web page for more information.

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Housings - Flange Mount - Non Aligning - Needle Roller.


Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  





Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top





Top



PRODUCTS

Angle Balls Bearings Acetal Bearings Angular C... Bearings Ball Bearings Conveyor Bearings Grooved P... Bearings Mounted Bearings PEEK Bearings and Housi... Bearings for Housings Belts PosiDrive Books Bushes Plastic Bushings Spherical Cam Followers Cams Chain and Sprocket... Circlips Clutches Collars Couplings Helical ... Couplings Other Dental Bearing Kits Drylin Bearings an... Dual Eye Joints Dual Vee Bearings Gadgets Gear Racks Circula... Gear Racks Flexible Gearboxes Cross Axis Gearboxes Inline Gearboxes Inline E... Gearboxes Offset Gearboxes Right Angle Gearboxes Tee Gears Cluster Gears Imperial Ant... Gears Imperial Bevel

Paypal Accepted
Paypal
Secure Checkout
See PAYMENTS


Gears Imperial Hel... Gears Imperial Int... Gears Imperial Mitre Gears Imperial Racks Gears Imperial Spur Gears Metric AntiB... Gears Metric Bevel Gears Metric Helical Gears Metric Internal Gears Metric Mitre Gears Metric Racks Gears Metric Spira... Gears Metric Spira... Gears Metric Spur Gears Metric Stem Gears Metric Worms Housings with Inte... Keys and Keysteel Leadscrews Linear Slides Mounts Plate Nuts Nuts Lock Pinion Wire Imperial Pins General Pins Taper Plungers Ball Pulleys Flat Belt Ratchets and Pawls Rollers Screws Cap Head Screws Countersunk Screws Hex Head Screws Pan Head Screws Security Screws Socket Set ... Shafting Precision... Sheet Shim Spacers

Visa Card Accepted
Visa
Secure Checkout


Spring Wire Spur Gear Stock Im... Spur Gear Stock Me... Spur Gears Circula... Strip Stroke Rotary Bush... Surplus Stock Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Washers Finishing Washers Flat Metallic Washers Lock

Site Summary

Freight Rates
Terms and Conditions
Privacy Policy

Miniature Bearings and Small Parts offers 112504 products in 3013 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within USA and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings and Small Parts is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Miniature Bearings and Small Parts 1997. All rights reserved.