About Us Brands Contact FAQ Freight Payments Products Search Site Technical More Links...

S100 Reid
Miniature Bearings and Small Parts




We found 15 matching cross referenced parts. Show me.

Category Matches

Fishing Reel Parts

TopHide Pictures

Procyon 100 HSD Daiwa Parts
Procyon 100 HSD Daiwa Parts

Search Rating: 100%

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Procyon 100 HSD Daiwa Parts.

Dental Handpiece Parts

TopHide Pictures

Micromotor Isolite 100 and 300 Bien Air Parts
Micromotor Isolite 100 and 300 Bien Air Parts

Search Rating: 99%

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Micromotor Isolite 100 and 300 Bien Air Parts.

Top Air 100 Series W.H. Parts
Top Air 100 Series W.H. Parts

Search Rating: 99%

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Top Air 100 Series W.H. Parts.

Enclosures

TopHide Pictures

Enclosures - Aluminium - 100 Series
Enclosures - Aluminium - 100 Series

Search Rating: 99%

Also see combined categories:
All Enclosures

Great little boxes ready for you to adapt to your mechanical or electrical projects.

Internal guide slots for mounting PCB assemblies vertically. Ideal for housing sensitive electrical, mechanical, pneumatic or hydraulic devices. Provides effective shielding of EMI and RFI. Designed to IP65 of IEC529 and NEMA 4 (dust and hoseproof). The lid incorporates a recessed neoprene gasket.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Enclosures - Aluminium - 100 Series.

Gearboxes Offset

TopHide Pictures

Gearboxes - Offset - 117 x 100 x 48
Gearboxes - Offset - 117 x 100 x  48

Search Rating: 98%

Also see combined categories:
All Offset Gearboxes

FF20 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Gear: High Carbon Steel 817M40(EN24). Weight: 1.9kg. Backlash: 1o. Hours Life: 12000 hr. Max Input Speed: 2000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. You will need to assess duty, cycles and confirm gearbox suitability with your own calculations. Torque figures are to be used for guidance only.

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Gearboxes - Offset - 117 x 100 x 48.

Gearboxes - Offset - 310 x 240 x 100
Gearboxes - Offset - 310 x 240 x 100

Search Rating: 96%

Also see combined categories:
All Offset Gearboxes

FF50 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Gear: High Carbon Steel 817M40(EN24). Weight 26.3kg. Backlash: 1o. Hours Life: 12000 hr. Max Input Speed: 1500 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. You will need to assess duty, cycles and confirm gearbox suitability with your own calculations. Torque figures are to be used for guidance only.

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Gearboxes - Offset - 310 x 240 x 100.

Pins - Dowel

TopHide Pictures

Pins - Dowel - Extractable
Pins - Dowel - Extractable

Search Rating: 94%

Also see combined categories:
All Dowel Pins

Hardened and Ground Steel 100 Cr6. Din 7979.

Extractable dowels have a thread tapped in the end to fascilitate removal from blind holes. An air release flat is ground along the full length of the pin to overcome the problem of pressure build up by trapped air. Hardness 55-62 HRC, HV550-650.

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Pins - Dowel - Extractable.

Pins - Dowel - Extractable - With Flat
Pins - Dowel - Extractable - With Flat

Search Rating: 93%

Also see combined categories:
All Dowel Pins

Hardened and Ground Steel 100 Cr6 with a ground flat along one edge

Extractable dowels have a thread tapped in the end to fascilitate removal from blind holes. An air release flat is ground along the full length of the pin. Hardness 55-62 HRC, HV550-650.

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Pins - Dowel - Extractable - With Flat.

Locking Bushings

TopHide Pictures

Elements - Locking
Elements - Locking

Search Rating: 92%

Also see combined categories:
All Locking Assemblies

2.4 to 2200 Nm, 6-80mm Bores

ETG 100 High Strength Steel for sizes up to 55mm bore. C60 Steel for sizes over 55mm bore. Recommended machining tolerances Shaft h8, Hub H8.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Elements - Locking.

Cable

TopHide Pictures

Cable - Synchromesh
Cable - Synchromesh

Search Rating: 91%

Pitch Error +/-0.050 mm. Cumulative Pitch Error +/-4.070 mm max. over 100 pitches. Temperature Range = -30 Deg. Celcius to +80 Deg. Celcius. Avoid strong acids, alkalies and organic solvents.

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Cable - Synchromesh.

Keys and Keysteel

TopHide Pictures

Keys - Gib Head - Steel
Keys - Gib Head - Steel

Search Rating: 91%

Also see combined categories:
All Gib Head Keys

Tapered 3.000 mm per 300 mm (1:100).


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Keys - Gib Head - Steel.

Studs

TopHide Pictures

Studs - Threaded - Standard
Studs - Threaded - Standard

Search Rating: 90%

Metric and imperial sizes. Steel and 303 stainless steel.

Yield strength 100,000 PSI. Tensile strength 125,000 PSI.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Studs - Threaded - Standard.

Hoist Rings

TopHide Pictures

Rings - Hoist - With Ball Bearings
Rings - Hoist - With Ball Bearings

Search Rating: 90%

Also see combined categories:
All Hoist Rings

Multidirectional loading with design factor 4 to 1

Adjustable under load. Suitable for through bore holes. Suitable for all loads which have to be rotated 360o. High tensile suspension ring and bearing housing. 100 percent electro magnetic crack tested.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Rings - Hoist - With Ball Bearings.

Keys and Keysteel

TopHide Pictures

Keys - Gib Head - Zinc Plated
Keys - Gib Head - Zinc Plated

Search Rating: 90%

Also see combined categories:
All Gib Head Keys

Tapered 3.000 mm per 300 mm (1:100).


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Keys - Gib Head - Zinc Plated.

Protective Packing and Sleeves

TopHide Pictures

Sleeving - Mesh
Sleeving - Mesh

Search Rating: 87%

Low cost protection for exterior threaded and cylindrical parts

Elastic snug tight fit on straight, tapered or contoured parts. Made from polyethylene. Thickness of web approx 1.8mm. Sold per foot (300mm). Maximum contunuous roll is 100 feet (30 mtrs).


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Sleeving - Mesh.

O-Rings

TopHide Pictures

O-Rings - Neoprene Rubber
O-Rings - Neoprene Rubber

Search Rating: 86%

Also see combined categories:
All O-Rings

Excellent resistance to ageing and weathering effects.

Temperature Range: -20oC to +100oC. Resistant to ozone and refrigeration chemicals such as freon 12 and 22. Moderate resistance to swelling in mineral oils, greases and water. Not resistant to aromatic compounds such as benzene, toulene, chlorinated hydrocarbons, esters, ethers or ketones.

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia O-Rings - Neoprene Rubber.

Couplings Insert and Jaw Type

TopHide Pictures

Couplings - Spline Type - Complete
Couplings - Spline Type - Complete

Search Rating: 86%

Also see combined categories:
All Insert and Jaw Type Couplings

0.5 to 4.5 Nm. 12000 to 24000 rpm.

Maximum parallel offset 0.2mm, Maximum working angle 2 Deg. High RPM. No Lubrication. Electrically Isolated. Dampens Shock & Vibration. Operating temperature -30 to 100 oC.

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Couplings - Spline Type - Complete.

Couplings - Spline Type - Spare Hubs
Couplings - Spline Type - Spare Hubs

Search Rating: 85%

Also see combined categories:
All Insert and Jaw Type Couplings

0.5 to 4.5 Nm. 12000 to 24000 rpm.

Maximum parallel offset 0.2mm, Maximum working angle 2 Deg. High RPM. No Lubrication. Electrically Isolated. Dampens Shock & Vibration. Operating temperature -30 to 100 oC.

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Couplings - Spline Type - Spare Hubs.

Seals and Sealing

TopHide Pictures

Seals - Door Edge Protection Material
Seals - Door Edge Protection Material

Search Rating: 84%

Heavy duty edge protection with gripper metal insert. Made from black PVC. Heat resistant to 100 Deg C. Steel spring core.

Easily presses on and forms around 90o corners. No gluing necessary. EPDM is recommended for water and dust applications. NBR is recommended for exposure to oils and solvents. Compress 3.2 to 4.8mm for best sealing,. Spring steel core. Black only.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Seals - Door Edge Protection Material.

Drylin Bearings and Systems

TopHide Pictures

Drylin Sliding Bearings
Drylin Sliding Bearings

Search Rating: 84%

Linear sliding motion. Use with Drylin Aluminium Shafts.

Sliding film Iglidur J. Maximum Mean Surface Pressure: 25 N/mm2. Highest Wear Resistance at loads: Less than 2 N/mm2. Maximum Speed: 8 m/s (dry) Greater than 10 m/s (lubricated) 1.5 m/s (rotating dry). Working Temp. Range: -60oC to +100oC (increased wear when used in excess of 80oC).

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Drylin Sliding Bearings.

Couplings Insert and Jaw Type

TopHide Pictures

Couplings - Spline Type - Spare Poyurethane Splines
Couplings - Spline Type - Spare Poyurethane Splines

Search Rating: 84%

Also see combined categories:
All Insert and Jaw Type Couplings

0.5 to 4.5 Nm. 12000 to 24000 rpm.

Maximum parallel offset 0.2mm, Maximum working angle 2 Deg. High RPM. No Lubrication. Electrically Isolated. Dampens Shock & Vibration. Operating temperature -30 to 100 oC.

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Couplings - Spline Type - Spare Poyurethane Splines.

Balls

TopHide Pictures

Balls - Stainless Steel - 304 Grade
Balls - Stainless Steel - 304 Grade

Search Rating: 83%

Also see combined categories:
All Metallic Balls

A2 Grade. Low magnetic permeability. Good corrosion resistance. Excellent for use in handling foodstuffs.

Tolerances available on request. Grade 100. Non annealed. Hardness: Rockwell C: 25-39. Specific Gravity: 7.916. Low magnetic permeability. Good corrosion resistance. Excellent for use in handling foodstuffs. Note! Increase in magnetic permeability may occur due to the grinding process and can be relieved by heating to over 1000 oC.

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Balls - Stainless Steel - 304 Grade.

Balls - Stainless Steel - 316 Grade
Balls - Stainless Steel - 316 Grade

Search Rating: 81%

Also see combined categories:
All Metallic Balls

A4 Grade. Very low magnetic permeability. Resistant to severe corrosive conditions. Excellent welding and brazing qualities.

Tolerances available on request. Grade 100. Hardness: Rockwell C: 25-39. Specific Gravity: 7.972. Low magnetic permeability. Resistant to severe corrosive conditions. Excellent welding and brazing qualities. Note! Increase in magnetic permeability may occur due to the grinding process and can be releived by heating to over 1000 oC.

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Balls - Stainless Steel - 316 Grade.

Hoist Rings

TopHide Pictures

Rings - Hoist - Bar-Tite -tm-
Rings - Hoist - Bar-Tite -tm-

Search Rating: 81%

Also see combined categories:
All Hoist Rings

Range of movement 180o pivot, 360o swivel.

High tensile alloy steel. 100 percent magnetic particle inspected. Safety factor minimum 5 to 1. Black oxide finish per Mil C-13924B. Certified heat treatment.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Rings - Hoist - Bar-Tite -tm-.

Mounts Leveling

TopHide Pictures

Mounts - Leveling - Hygienic - Anchoring - One Hole
Mounts - Leveling - Hygienic - Anchoring - One Hole

Search Rating: 78%

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

ANSI 304 stainless steel provides high corrosion resistance. Rounded polished base for fluid run-off during washdown applications. Adjusters.

Operating temperature -20 to 100o C. Rubber base meets FDA 177-2600. 5o swivel for good floor contact.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Mounts - Leveling - Hygienic - Anchoring - One Hole.

Mounts - Leveling - Hygienic - Anchoring - Two Hole
Mounts - Leveling - Hygienic - Anchoring - Two Hole

Search Rating: 78%

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

ANSI 304 stainless steel provides high corrosion resistance. Rounded polished base for fluid run-off during washdown applications. Adjusters.

Operating temperature -20 to 100o C. Rubber base meets FDA 177-2600. 5o swivel for good floor contact.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Mounts - Leveling - Hygienic - Anchoring - Two Hole.

Mounts - Leveling - Hygienic - Anchoring - Low Profile - High Swivel
Mounts - Leveling - Hygienic - Anchoring - Low Profile - High Swivel

Search Rating: 77%

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

ANSI 304 stainless steel provides high corrosion resistance. Rounded polished base for fluid run-off during washdown applications. Adjusters.

Operating temperature -20 to 100o C. Wrench flats in thread still allow for full use of threaded section. 12o swivel.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Mounts - Leveling - Hygienic - Anchoring - Low Profile - High Swivel.

Mounts - Leveling - Hygienic - Anchoring - Low Profile - Low Swivel
Mounts - Leveling - Hygienic - Anchoring - Low Profile - Low Swivel

Search Rating: 77%

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

ANSI 304 stainless steel provides high corrosion resistance. Rounded polished base for fluid run-off during washdown applications. Adjusters.

Operating temperature -20 to 100o C. Wrench flats in thread still allow for full use of threaded section. 1o swivel.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Mounts - Leveling - Hygienic - Anchoring - Low Profile - Low Swivel.

Bushes Plastic

TopHide Pictures

Bushes - Plastic - Ertalyte TX - Flanged
Bushes - Plastic - Ertalyte TX - Flanged

Search Rating: 76%

Also see combined categories:
All Plastic Bushes
All Flanged Plastic Bushes

Self lubricated, high mechanical strength, stiffness and hardness.

Specific Gravity 1.44 g/cm3. Operating Temp 115 C / 5000 hrs - 100 C / 20000 hrs. Tensile Strength 76 Mpa. Hardness 94 Rockwell M. High mechanical strength, stiffness and hardness. Self lubricating.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Bushes - Plastic - Ertalyte TX - Flanged.

Linear Slides

TopHide Pictures

Slides - Linear - Clean Room
Slides - Linear - Clean Room

Search Rating: 76%

Also see combined categories:
All Linear Slides

Stainless Steel throughout (similar to 440C). Speed: 0.5 m/sec (30 m/min). Temperature: +100oC (Continuous), +140oC (Maximum). Life will be less than normal at +100oC and dimensions may change. Lateral Loading: Dynamic x 1.13 C - Static x 1.19 Co. Precision Linear Slide Unit is a compact linear motion rolling guide for limited stroke length.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Slides - Linear - Clean Room.

Magnets Bar

TopHide Pictures

Magnets - Bar
Magnets - Bar

Search Rating: 73%

Also see combined categories:
All Magnets
All Bar Magnets

Great hobby and educational magnets for learning about magnetic attraction

These strong ferrite magnets can be used in hobbies or industrial applications. Non listed sizes can be ordered with minimum quantities often as low as 100 pieces. These are a basic magnet with unfinished edges. The nature of this product is that the edges chip easily so please don't rely on parts having an esthetically pleasing edge finish.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Magnets - Bar.

Nuts Lock

TopHide Pictures

Locknuts - Stainless Insert
Locknuts - Stainless Insert

Search Rating: 71%

Simplify the assembly and reduce costs involved in securing ball bearings. One piece item where the locking function is performed by a spring peened into the top of the nut.

Nut Body: Low Carbon Steel. Locking Insert: Stainless Steel Hardness HB 201-269. The spring bears on the flank of the shaft thread with force (P) generating reaction force (Pí) in the screw threads with a resulting high friction torque (prevailing torque). Unique slim body design. Secure locking without keyway and tab washer. One piece construction reduces stock and allows simpler, quicker assembly. Simple infinite adjustment. Re-usable up to 100 times. Resists vibration and shock. Equally effective for rotation in either direction even with rapid reversals.

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Locknuts - Stainless Insert.

Bearings Linear

TopHide Pictures

Bearings - Linear - Ball - Closed
Bearings - Linear - Ball - Closed

Search Rating: 71%

Also see combined categories:
All Closed Linear Ball Bearings

Standard closed type to run on standard 60HRC shafts with h6 tolerances

Use with hardened precision ground shafting. Shaft tolerance: h6 (Normal Fit), j6 (Close Fit). Housing Tolerance: H7 (Clearance Fit), J7 (Interference Fit). Max Temp: 100 oC Intermittent, 80 Deg C continuous.

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Bearings - Linear - Ball - Closed.

Hoist Rings

TopHide Pictures

Rings - Hoist - Safety Engineered
Rings - Hoist - Safety Engineered

Search Rating: 70%

Also see combined categories:
All Hoist Rings

Range of movement 180o pivot and 360o swivel. Safety factor 5 to 1. Meets MIL-STD1365 (11) or MIL-STD209C. Certified heat treated alloy steel. Made from one piece forged steel.

100 percent magnetic particle inspected.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Rings - Hoist - Safety Engineered.

Tape

TopHide Pictures

Tape - Fiberglass - PTFE Coated
Tape - Fiberglass - PTFE Coated

Search Rating: 68%

Also see combined categories:
All Tape

Heat Sealer Tape

Non stick ptfe tape is resistant to abrasion, high temperature and chemicals. Commonly used on heatsealing machines, mould protection, packaging, automotive and electrical applications. Temperature range minus 73 oC to 260 oC (-100 to 500 Deg F). Less than 5 percent elongation.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Tape - Fiberglass - PTFE Coated.

Hoist Rings

TopHide Pictures

Rings - Hoist - Heavy Duty - MIL-STD1365
Rings - Hoist - Heavy Duty - MIL-STD1365

Search Rating: 68%

Also see combined categories:
All Hoist Rings

Range of movement 180o pivot and 360o swivel. Safety factor 5 to 1. Meets MIL-STD1365 (11) or MIL-STD209C. Certified heat treated alloy steel. Made from one piece forged steel.

100 percent magnetic particle inspected. Meets USA OSHA standards. Black oxide finish.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Rings - Hoist - Heavy Duty - MIL-STD1365.

Motors DC

TopHide Pictures

Motors - DC 6mm Diameter
Motors - DC  6mm Diameter

Search Rating: 68%

Also see combined categories:
All DC Motors

Our smallest motors at an affordable price.

Various models 10000 to 30000 rpm. Low starting voltage of Less than0.8V. Rated Voltage 1.3V. Less than 43 dB Mechanical Noise Level. 100 hours / 100000 turns mechanical life. Clockwise rotation when viewed from shaft end. Not recommended for reversing.

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Motors - DC 6mm Diameter.

Gear Racks Flexible

TopHide Pictures

Gear Racks - Flexible
Gear Racks - Flexible

Search Rating: 67%

Also see combined categories:
All Flexible Gear Racks

Blue acetal. Ideal for curved or irregular surfaces. Can fit a bent radius as small as 75mm.

20o Pressure Angle. Resistant to weak acids and alkalis, oil, grease, petrol, alcohol, ketones. Working temperature 100 Deg. C, Intermittent to 149 Deg. C. See optional rack clamps and guide rails. Longer lengths available on special order.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Gear Racks - Flexible.

Housings with Integral Bearing

TopHide Pictures

Housings - Bearing - Pillow Block - Thermoplastic with Chrome Steel Bearing
Housings - Bearing - Pillow Block - Thermoplastic with Chrome Steel Bearing

Search Rating: 65%

Thermoplastic housed units offer an economical alternative with good chemical and washdown resistance.

Thermoplastic housings are off-white and are made from glass reinforced PBT resin. Excellent mechanical, thermal and electrical properties. Operational temperature -20 to +100 oC.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Housings - Bearing - Pillow Block - Thermoplastic with Chrome Steel Bearing.

Housings - Bearing - 3 Bolt Offset - Thermoplastic with Chrome Steel Bearing
Housings - Bearing - 3 Bolt Offset - Thermoplastic with Chrome Steel Bearing

Search Rating: 65%

Thermoplastic housed units offer an economical alternative with good chemical and washdown resistance.

Thermoplastic housings are off-white and are made from glass reinforced PBT resin. Excellent mechanical, thermal and electrical properties. Operational temperature -20 to +100 oC.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Housings - Bearing - 3 Bolt Offset - Thermoplastic with Chrome Steel Bearing.

Housings - Bearing - 4 Bolt Flange - Thermoplastic with Chrome Steel Bearing
Housings - Bearing - 4 Bolt Flange - Thermoplastic with Chrome Steel Bearing

Search Rating: 65%

Thermoplastic housed units offer an economical alternative with good chemical and washdown resistance.

Thermoplastic housings are off-white and are made from glass reinforced PBT resin. Excellent mechanical, thermal and electrical properties. Operational temperature -20 to +100 oC.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Housings - Bearing - 4 Bolt Flange - Thermoplastic with Chrome Steel Bearing.

Bearings Linear

TopHide Pictures

Bearings - Linear - Ball - Stainless Steel - Closed
Bearings - Linear - Ball - Stainless Steel - Closed

Search Rating: 63%

Also see combined categories:
All Closed Linear Ball Bearings

Standard closed type to run on standard 60HRC shafts with h6 tolerances. For running on shafts fixed at the ends.

Use with hardened precision ground shafting. Shaft tolerance: h6 (Normal Fit), j6 (Close Fit). Housing Tolerance: H7 (Clearance Fit), J7 (Interference Fit). Max Temp: 100 oC Intermittent, 80 Deg C continuous.

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Bearings - Linear - Ball - Stainless Steel - Closed.

Bearings Acetal

TopHide Pictures

Bearings - Acetal - Double Row - with Glass Balls
Bearings - Acetal - Double Row - with Glass Balls

Search Rating: 63%

Also see combined categories:
All Plastic Ball Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from Ground Glass - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Bearings - Acetal - Double Row - with Glass Balls.

Bearings - Acetal - Single Row - with Glass Balls
Bearings - Acetal - Single Row - with Glass Balls

Search Rating: 63%

Also see combined categories:
All Plastic Ball Bearings
All Plastic Single Row Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from Ground Glass - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Bearings - Acetal - Single Row - with Glass Balls.

Hoist Rings

TopHide Pictures

Rings - Hoist - Heavy Duty
Rings - Hoist - Heavy Duty

Search Rating: 63%

Also see combined categories:
All Hoist Rings

Self aligning in the direction of the load. Minimum of 5 to 1 safety factor in any direction.

Rotates 360o. One piece construction - no lost parts. Alloy steel with black oxide finish. 100 percent magnetic particle inspected. Rated load based on specific thread torques as shown. Recommended that the torque shown be used when installing these hoist rings.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Rings - Hoist - Heavy Duty.

Stroke Rotary Bushings

TopHide Pictures

Bushings - Stroke Rotary - Miniature
Bushings - Stroke Rotary - Miniature

Search Rating: 61%

Also see combined categories:
All Stroke Rotary Bushings

2 to 12mm Shaft Sizes. Can operate in both linear and rotary directions at the same time.

Set includes outer ring, ball cage and shaft. Ball Cage: Brass Balls: Hard Steel / Shaft: Hard Steel Outer Ring: Hard Steel. Temperature: +100oC (Constant), +120oC (Maximum). Stroke: = (L1 - Lb) x 2. Supplied with extreme accuracy with zero to minimum preload.

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Bushings - Stroke Rotary - Miniature.

Bearings Acetal

TopHide Pictures

Bearings - Acetal - Double Row - with 316 Stainless Steel Balls
Bearings - Acetal - Double Row - with 316 Stainless Steel Balls

Search Rating: 60%

Also see combined categories:
All Plastic Ball Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from 316 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Bearings - Acetal - Double Row - with 316 Stainless Steel Balls.

Bearings - Acetal - Single Row - with 302 Stainless Steel Balls
Bearings - Acetal - Single Row - with 302 Stainless Steel Balls

Search Rating: 60%

Also see combined categories:
All Plastic Ball Bearings
All Plastic Single Row Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from 302 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Bearings - Acetal - Single Row - with 302 Stainless Steel Balls.

Bearings - Acetal - Single Row - with 316 Stainless Steel Balls
Bearings - Acetal - Single Row - with 316 Stainless Steel Balls

Search Rating: 60%

Also see combined categories:
All Plastic Ball Bearings
All Plastic Single Row Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from 316 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Bearings - Acetal - Single Row - with 316 Stainless Steel Balls.

Linear Slides

TopHide Pictures

Slides - Linear - Non Recirculating Ball - Standard
Slides - Linear - Non Recirculating Ball - Standard

Search Rating: 60%

Also see combined categories:
All Linear Slides

The BSP precision Linear Slide series is a lightweight and compact linear motion rolling guide made of stainless steel formed precisely to be U-shaped table or track rail.

Slides: Stainless Steel End Stop / Retainer: Synthetic Resin. Maximum Speed: 0.5 m/sec (30m/min). Temperature: +100oC (Constant), +120oC (Maximum). Does not incorporate a mechanical stopper. Sensitive to external contaminants.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Slides - Linear - Non Recirculating Ball - Standard.

Couplings Other

TopHide Pictures

Couplings - K Type
Couplings - K Type

Search Rating: 58%

Up to 3600 RPM - Minus 20 to Plus 60o C. 0.34 to 18 Nm.

Strong, flexible polyurethane or Hyrtel(R) is cut and tear resistant. Up to 3600 RPM. Urethane: Minus 20 to Plus 60o C / Hyrtel(R) : Minus 40 to Plus 100o C. Precision swaged mechanically crimped hubs. Annealed steel hubs.

Related Information:

Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Couplings - K Type.

Housings with Integral Bearing

TopHide Pictures

Housings - Bearing - Pillow Block - Thermoplastic with Stainless Bearing
Housings - Bearing - Pillow Block - Thermoplastic with Stainless Bearing

Search Rating: 55%

Thermoplastic housed units offer an economical alternative with good chemical and washdown resistance.

Food grade. Thermoplastic housings are off-white and are made from glass reinforced PBT resin. Excellent mechanical, thermal and electrical properties. Operational temperature -20 to +100 oC. Bearings are 440C stainless steel. Bushings and grease fittings are 300 grade stainless steel.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Housings - Bearing - Pillow Block - Thermoplastic with Stainless Bearing.

Linear Slides

TopHide Pictures

Slides - Linear - Recirculating Ball - Standard
Slides - Linear - Recirculating Ball - Standard

Search Rating: 55%

Also see combined categories:
All Linear Slides

The BSR precision Linear Slide series is a lightweight and compact linear motion rolling guide made of stainless steel formed precisely to be U-shaped table or track rail.

Slides: Stainless Steel End Stop / Retainer: Synthetic Resin. Maximum Speed: 0.5 m/sec (30m/min). Temperature: +100oC (Constant), +120oC (Maximum). Does not incorporate a mechanical stopper. Sensitive to external contaminants. Note BSR1530SL and BSR2040SL can not be mounted from inside of track rail.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Slides - Linear - Recirculating Ball - Standard.

Housings with Integral Bearing

TopHide Pictures

Housings - Bearing - 3 Bolt Offset - Thermoplastic with Stainless Bearing
Housings - Bearing - 3 Bolt Offset - Thermoplastic with Stainless Bearing

Search Rating: 54%

Thermoplastic housed units offer an economical alternative with good chemical and washdown resistance.

Food grade. Thermoplastic housings are off-white and are made from glass reinforced PBT resin. Excellent mechanical, thermal and electrical properties. Operational temperature -20 to +100 oC. Bearings are 440C stainless steel. Bushings and grease fittings are 300 grade stainless steel.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Housings - Bearing - 3 Bolt Offset - Thermoplastic with Stainless Bearing.

Housings - Bearing - 4 Bolt Flange - Thermoplastic with Stainless Bearing
Housings - Bearing - 4 Bolt Flange - Thermoplastic with Stainless Bearing

Search Rating: 54%

Thermoplastic housed units offer an economical alternative with good chemical and washdown resistance.

Food grade. Thermoplastic housings are off-white and are made from glass reinforced PBT resin. Excellent mechanical, thermal and electrical properties. Operational temperature -20 to +100 oC. Bearings are 440C stainless steel. Bushings and grease fittings are 300 grade stainless steel.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Housings - Bearing - 4 Bolt Flange - Thermoplastic with Stainless Bearing.

Bearings - Self Clinching - Miniature - Self Aligning
Bearings - Self Clinching - Miniature - Self Aligning

Search Rating: 50%

Also see combined categories:
All Housings with Integral Bearing

Spyraflo pressed steel housings incorporating Abec 3 bearings in a special seat allowing for +/- 5 Deg Misalignment. Improves performance and reduces manufacturing costs and simplify designs. Designed to press into a mounting plate as thin as 1.5mm.

Clinches into a plate bored to the required housing bore. Minimum plate thickness 1.6mm to no maximum. Maximum mounting hardness 100 Rockwell B. Operating temperature Minus 34 oC to Plus 121 Deg C. Compensates for mounting hole tolerances up to 0.07mm. 4.76 to 10mm bores. RoHS, REACH and SVHC environmental compliant.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia Bearings - Self Clinching - Miniature - Self Aligning.

Dental Handpiece Parts

TopHide Pictures

1000 Midwest Parts
1000 Midwest Parts

Search Rating: 43%

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Customers in the Australia please try the Smallparts and Bearings site for cheaper delivery within Australia 1000 Midwest Parts.

Cross Referenced Part Numbers

TopHide Pictures


SACB-051 Reid part number AS-100

Matches our part number
SACB-051
(Click item to order)

Description: Stroke: 50.80. Type: Single. Max Stroke Force: 249.48.

Group: Springs - Air - Convolute Bellows

Stock: Backorder  



BLP-095-1016-BT-S17 Reid part number BLBS-100

Matches our part number
BLP-095-1016-BT-S17
(Click item to order)

Description: Nominal Diameter: 9.53. Grip Length: 101.60. Locking Ball to End (C): 9.270.

Group: Pins - Ball Lock - Button Handle - Stainless Steel

Stock: 2  



BLP-095-1016-LI-S17 Reid part number BLLS-100

Matches our part number
BLP-095-1016-LI-S17
(Click item to order)

Description: Nominal Diameter: 9.53. Grip Length: 101.60. Locking Ball to End (C): 9.270.

Group: Pins - Ball Lock - L-Handle - Industrial - Stainless Steel

Stock: Backorder  



BLP-095-1016-TI-S17 Reid part number BLTS-100

Matches our part number
BLP-095-1016-TI-S17
(Click item to order)

Description: Nominal Diameter: 9.53. Grip Length: 101.60. Locking Ball to End (C): 9.270.

Group: Pins - Ball Lock - T-Handle - Industrial - Stainless Steel

Stock: Backorder  



SS048F-0064-AS-BT Reid part number BTS-100

Matches our part number
SS048F-0064-AS-BT
(Click item to order)

Description: Thread Size: 10-32 UNF (4.762mm). Thread Length (l): 6.4. Overall Length (l + l1): 7.5.

Group: Socket Set Screws - Brass Tipped - Alloy Steel

Stock: 9  



SS048F-0064-S3-NT Reid part number BTS-1000

Matches our part number
SS048F-0064-S3-NT
(Click item to order)

Description: Thread Size: 10-32 UNF (4.762mm). Thread Length (Tl): 6.4. Overall Length (L): 7.5.

Group: Socket Set Screws - Nylon Tipped - 304 Stainless Steel

Stock: Backorder  



SS048F-0095-S3-NT Reid part number BTS-1005

Matches our part number
SS048F-0095-S3-NT
(Click item to order)

Description: Thread Size: 10-32 UNF (4.762mm). Thread Length (Tl): 9.5. Overall Length (L): 10.7.

Group: Socket Set Screws - Nylon Tipped - 304 Stainless Steel

Stock: Backorder  



ES-0754-1080-10-M Reid part number ES-1001

Matches our part number
ES-0754-1080-10-M
(Click item to order)

Description: OD (D0): 7.54. Overall Length (L0): 108.0. Wire Diameter (d): 1.04.

Group: Springs - Extension - Music Wire

Stock: Backorder  



MLV-0580-M12-3P Reid part number MLPSS-100

Matches our part number
MLV-0580-M12-3P
(Click item to order)

Description: Load: 580. Thread Size: M12.0x1.75 (12.0mm). Hex Flats (B): 20.000.

Group: Mounts - Leveling - Stud Type - 303 Stainless Steel - Padded

Stock: Backorder  



CS-1379-2540-19-M Reid part number S-100

Matches our part number
CS-1379-2540-19-M
(Click item to order)

Description: Spring OD (D0): 13.79. Free Length (L0): 254.0. Wire Diameter (d): 1.93.

Group: Springs - Compression - Standard - Steel

Stock: Backorder  



CS-0762-0127-05-M-C Reid part number S-1000

Matches our part number
CS-0762-0127-05-M-C
(Click item to order)

Description: Spring OD (D0): 7.62. Free Length (L0): 12.7. Wire Diameter (d): 0.51.

Group: Springs - Compression - Standard - Steel

Stock: 7  



CS-0762-0254-05-M-C Reid part number S-1005

Matches our part number
CS-0762-0254-05-M-C
(Click item to order)

Description: Spring OD (D0): 7.62. Free Length (L0): 25.4. Wire Diameter (d): 0.51.

Group: Springs - Compression - Standard - Steel

Stock: 8  



SLQ-2540-4445-12700-H Reid part number SHS-1000

Matches our part number
SLQ-2540-4445-12700-H
(Click item to order)

Description: Nominal Square Size: 25.400. Outside Diameter (C): 44.450. Length (B): 127.000.

Group: Sleeves - Square Hole - Plain - Hardened

Stock: Backorder  



T-0254-0410-F-S440-NY Reid part number TQS-100

Matches our part number
T-0254-0410-F-S440-NY
(Click item to order)

Description: Nominal Shaft Size (d1): 25.400. OD (D1): 41.275. Thickness (T): 11.113.

Group: Bearings - Thrust - Ball - Flat - Stainless Steel

Stock: Backorder  



CSU-0381-032 Reid part number US-100

Matches our part number
CSU-0381-032
(Click item to order)

Description: Outside Diameter: 38.1. Inside Diameter: 19.1. Free Length: 31.8.

Group: Springs - Urethane

Stock: Backorder  



Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  





Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top





Top



PRODUCTS

Angle Balls Bearings Acetal Bearings Angular C... Bearings Ball Bearings Conveyor Bearings Grooved P... Bearings Mounted Bearings PEEK Bearings and Housi... Bearings for Housings Belts PosiDrive Books Bushes Plastic Bushings Spherical Cam Followers Chain and Sprocket... Circlips Clutches Collars Couplings Helical ... Couplings Other Dental Bearing Kits Drylin Bearings an... Dual Eye Joints Dual Vee Bearings Gadgets Gear Racks Circula... Gear Racks Flexible Gearboxes Cross Axis Gearboxes Inline Gearboxes Inline E... Gearboxes Offset Gearboxes Right Angle Gearboxes Tee Gears Cluster Gears Imperial Ant... Gears Imperial Bevel Gears Imperial Hel...

Paypal Accepted
Paypal
Secure Checkout
See PAYMENTS


Gears Imperial Int... Gears Imperial Mitre Gears Imperial Racks Gears Imperial Spur Gears Metric AntiB... Gears Metric Bevel Gears Metric Helical Gears Metric Internal Gears Metric Mitre Gears Metric Racks Gears Metric Spira... Gears Metric Spira... Gears Metric Spur Gears Metric Stem Gears Metric Worms Housings with Inte... Keys and Keysteel Leadscrews Linear Slides Mounts Plate Nuts Nuts Lock Pinion Wire Imperial Pins General Pins Taper Plungers Ball Pulleys Flat Belt Ratchets and Pawls Rollers Screws Cap Head Screws Countersunk Screws Hex Head Screws Pan Head Screws Security Screws Socket Set ... Shafting Precision... Sheet Shim Spacers Spring Wire

Visa Card Accepted
Visa
Secure Checkout


Spur Gear Stock Im... Spur Gear Stock Me... Spur Gears Circula... Strip Stroke Rotary Bush... Surplus Stock Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Washers Finishing Washers Flat Metallic Washers Lock

Site Summary

Freight Rates
Terms and Conditions
Privacy Policy

Miniature Bearings and Small Parts offers 112503 products in 3013 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within USA and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings and Small Parts is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Miniature Bearings and Small Parts 1997. All rights reserved.