More Links...

440 - Precision - Technical
Miniature Bearings and Small Parts

Precision - 440C Stainless and 52100 Chrome Steel

These tables cover ABEC and ISO tolerances for ball bearings.

Abec 1 or ISO P6 gradings apply to all precision bearings in our catalogue made from SAE52100 or 440C Stainless Steel unless otherwise specified.

The section of our bearing part number that specifies the grade is found near the end, preceded by the country of manufacture code. The following list shows most of our country/precision designations.

  • No designation: Abec 1
  • grP6: German made ISO P6 precision
  • jP6: Japanese made ISO P6 precision
  • uP6: US made ISO P6 precision
  • gr3: German made Abec 3 precision
  • j3: Japanese made Abec 3 precision
  • u3: US made ISO Abec 3 precision
  • grP5: German made ISO P5 precision
  • jP5: Japanese made ISO P5 precision
  • s5: Swiss made ISO P5 precision
  • uP5: US made ISO P5 precision
  • gr5: German made Abec 5 precision
  • j5: Japanese made Abec 5 precision
  • s5: Swiss made Abec 5 precision
  • u5: US made Abec 5 precision
  • gr7: German made Abec 7 Precision
  • s7: Swiss made Abec 7 Precision
  • u7: US made ISO Abec 7 Precision

No country of manufacture is specified in the part number of Abec 1 bearings since they are the most common bearings and supplies may be obtained from a number of different countries as required by demand and/or pricing. The majority of our Abec 1 bearings are Japanese manufactured. A manufacture code is printed on the label which can be used to determine the country of manufacture of a particular batch.

Each table covers either inner or outer ring tolerances for a defined size range as specified in the headers. Scroll down to see all tables...


Tolerances for Inner Rings
Dimensions are in 0.001 mm (thousandths of a mm)

Inner Rings with a Bore >= 0.6 mm and <= 2.5 mm

Precision Grade Mean Bore Deviation Deltadmp Bore Deviation Limit
Vdp
Width Deviation
DeltaBs
Max Side Deviation from Parallel
DeltaVBs
Track Parallel with Side
Sia
Bore Square with Side
Sd
Eccentricity of Tracks
Kia
ISO P0
0 to -8 10 0 to -40 12 - - 10
Abec 1
0 to -7.5 10 - - - - 7.5
ISO P6
0 to -7 8 0 to -40 12 - - 5
Abec 3
0 to -5 7.5 0 to -125 - - - 5
ISO P5
0 to -5 5 0 to -40 5 7.5 7.5 4
ISO P5A
0 to -5 3 0 to -25 5 7.5 7.5 3.5
Abec 5
0 to -5 5 0 to -40 5 7.5 7.5 3.5
Abec 5P
0 to -5 2.5 0 to -25 5 7.5 7.5 3.5
ISO P4
0 to -4 4 0 to -40 2.5 3 3 2.5
ISO P4A
0 to -5 2.5 0 to -25 2.5 3 3 2.5
Abec 7
0 to -4 4 0 to -40 2.5 2.5 2.5 2.5
Abec 7P
0 to -5 2.5 0 to -25 2.5 2.5 2.5 2.5
ISO P2
0 to -2.5 2.5 0 to -25 1.5 1.5 1.5 1.5
Abec 9
0 to -2.5 2.5 0 to -40 1.25 1.25 1.25 1.25
Abec 9P
0 to -2.5 1.25 0 to -25 1.25 1.25 1.25 1.25

Tolerances for Inner Rings
Dimensions are in 0.001 mm (thousandths of a mm)

Inner Rings with a Bore > 2.5 mm and <= 10 mm

Precision Grade Mean Bore Deviation Deltadmp Bore Deviation Limit
Vdp
Width Deviation
DeltaBs
Max Side Deviation from Parallel
DeltaVBs
Track Parallel with Side
Sia
Bore Square with Side
Sd
Eccentricity of Tracks
Kia
ISO P0
0 to -8 10 0 to -120 15 - - 10
Abec 1
0 to -7.5 10 0 to -125 - - - 7.5
ISO P6
0 to -7 8 0 to -120 15 - - 6
Abec 3
0 to -5 7.5 0 to -125 - - - 5
ISO P5
0 to -5 5 0 to -40 5 7.5 7.5 4
ISO P5A
0 to -5 3 0 to -25 5 7.5 7.5 3.5
Abec 5
0 to -5 5 0 to -40 5 7.5 7.5 3.5
Abec 5P
0 to -5 2.5 0 to -25 5 7.5 7.5 3.5
ISO P4
0 to -4 4 0 to -40 2.5 3 3 2.5
ISO P4A
0 to -5 2.5 0 to -25 2.5 3 3 2.5
Abec 7
0 to -4 4 0 to -40 2.5 2.5 2.5 2.5
Abec 7P
0 to -5 2.5 0 to -25 2.5 2.5 2.5 2.5
ISO P2
0 to -2.5 2.5 0 to -40 1.5 1.5 1.5 1.5
Abec 9
0 to -2.5 2.5 0 to -40 1.25 1.25 1.25 1.25
Abec 9P
0 to -2.5 1.25 0 to -25 1.25 1.25 1.25 1.25

Tolerances for Inner Rings
Dimensions are in 0.001 mm (thousandths of a mm)

Inner Rings with a Bore > 10 mm and <= 18 mm

Precision Grade Mean Bore Deviation Deltadmp Bore Deviation Limit
Vdp
Width Deviation
DeltaBs
Max Side Deviation from Parallel
DeltaVBs
Track Parallel with Side
Sia
Bore Square with Side
Sd
Eccentricity of Tracks
Kia
ISO P0
0 to -8 10 0 to -120 20 - - 10
Abec 1
0 to -7.5 10 0 to -125 - - - 11
ISO P6
0 to -7 8 0 to -120 20 - - 7
Abec 3
0 to -5 7.5 0 to -125 - - - 5
ISO P5
0 to -5 5 0 to -80 5 7.5 7.5 4
ISO P5A
0 to -5 3 0 to -25 5 7.5 7.5 3.5
Abec 5
0 to -5 5 0 to -80 5 7.5 7.5 3.5
Abec 5P
0 to -5 2.5 0 to -25 5 7.5 7.5 3.5
ISO P4
0 to -4 4 0 to -80 2.5 3 3 2.5
ISO P4A
0 to -5 2.5 0 to -25 2.5 3 3 2.5
Abec 7
0 to -4 4 0 to -80 2.5 2.5 2.5 2.5
Abec 7P
0 to -5 2.5 0 to -25 2.5 2.5 2.5 2.5
ISO P2
0 to -2.5 2.5 0 to -80 1.5 1.5 1.5 1.5
Abec 9
0 to -2.5 2.5 0 to -80 1.25 1.25 1.25 1.25
Abec 9P
0 to -2.5 1.25 0 to -25 1.25 1.25 1.25 1.25

Tolerances for Inner Rings
Dimensions are in 0.001 mm (thousandths of a mm)

Inner Rings with a Bore > 18 mm and <= 30 mm

Precision Grade Mean Bore Deviation Deltadmp Bore Deviation Limit
Vdp
Width Deviation
DeltaBs
Max Side Deviation from Parallel
DeltaVBs
Track Parallel with Side
Sia
Bore Square with Side
Sd
Eccentricity of Tracks
Kia
ISO P0
0 to -10 13 0 to -120 20 - - 13
Abec 1
0 to -11 13 0 to -120 20 - - 13
ISO P6
0 to -8 10 0 to -120 20 - - 8
Abec 3
0 to -8 10 0 to -120 20 - - 8
ISO P5
0 to -6 6 0 to -120 5 8 8 4
Abec 5
0 to -6 6 0 to -120 5 8 8 4
Abec 5P
0 to -5 2.5 0 to -25 5 8 8 4
ISO P4
0 to -5 5 0 to -120 2.5 4 4 2.5
Abec 7
0 to -5 5 0 to -120 2.5 4 4 2.5
Abec 7P
0 to -5 5 0 to -25 2.5 4 4 2.5
ISO P2
0 to -2.5 2.5 0 to -120 1.5 2.5 1.5 2.5
Abec 9
0 to -2.5 2.5 0 to -120 1.25 2.5 1.25 2.5
Abec 9P
0 to -2.5 1.25 0 to -25 1.25 1.25 1.25 2.5

Tolerances for Inner Rings
Dimensions are in 0.001 mm (thousandths of a mm)

Inner Rings with a Bore > 30 mm and <= 50 mm

Precision Grade Mean Bore Deviation Deltadmp Bore Deviation Limit
Vdp
Width Deviation
DeltaBs
Max Side Deviation from Parallel
DeltaVBs
Track Parallel with Side
Sia
Bore Square with Side
Sd
Eccentricity of Tracks
Kia
ISO P0
0 to -12 15 0 to -120 20 - - 15
Abec 1
0 to -12 15 0 to -120 20 - - 15
ISO P6
0 to -10 13 0 to -120 20 - - 10
Abec 3
0 to -10 13 0 to -120 20 - - 10
ISO P5
0 to -8 8 0 to -120 8 8 8 5
Abec 5
0 to -8 8 0 to -120 8 8 8 5
ISO P4
0 to -6 6 0 to -120 6 4 4 4
Abec 7
0 to -6 6 0 to -120 6 4 4 4
ISO P2
0 to -2.5 2.5 0 to -120 1.5 2.5 1.5 2.5
Abec 9
0 to -2.5 2.5 0 to -120 1.5 2.5 1.5 2.5

Tolerances for Inner Rings
Dimensions are in 0.001 mm (thousandths of a mm)

Inner Rings with a Bore > 50 mm and <= 80 mm

Precision Grade Mean Bore Deviation Deltadmp Bore Deviation Limit
Vdp
Width Deviation
DeltaBs
Max Side Deviation from Parallel
DeltaVBs
Track Parallel with Side
Sia
Bore Square with Side
Sd
Eccentricity of Tracks
Kia
ISO P0
0 to -12 19 0 to -150 25 - - 20
Abec 1
0 to -12 19 0 to -150 25 - - 20
ISO P6
0 to -12 15 0 to -150 25 - - 10
Abec 3
0 to -12 15 0 to -150 25 - - 10
ISO P5
0 to -9 9 0 to -150 6 8 8 5
Abec 5
0 to -9 9 0 to -150 6 8 8 5
ISO P4
0 to -7.5 7.5 0 to -150 4 5 5 4
Abec 7
0 to -7.5 7.5 0 to -150 4 5 5 4
ISO P2
0 to -4 4 0 to -150 1.5 2.5 1.5 2.5
Abec 9
0 to -4 4 0 to -150 1.5 2.5 1.5 2.5

Tolerances for Outer Rings
Dimensions are in 0.001 mm (thousandths of a mm)

Outer Rings with an OD > 2.5 mm and <= 18 mm

Precision Grade Mean Outer Deviation Deltadmp Absolute Limit of Outside Diameter Deviation
Vdp
Width Deviation
DeltaCs
Max Side Deviation from Parallel
DeltaVCs
Track Parallel with Side
Sea
OD Square with Side
Sd
Eccentricity of Tracks
Kea
ISO P0
0 to -8 10 Based on Bore Size Tables Based on Bore Size Tables - - 15
Abec 1
0 to -7.5 10 - - 15
ISO P6
0 to -7 9 - - 8
Abec 3
0 to -7.5 9 - - 7.5
ISO P5
0 to -5 5 8 8 5
ISO P5A
0 to -5 3 8 8 5
Abec 5
0 to -5 5 7.5 7.5 5
Abec 5P
0 to -5 5 7.5 7.5 5
ISO P4
0 to -4 4 5 4 3
ISO P4A
0 to -4 2.5 5 4 3.5
Abec 7
0 to -5 4 5 4 4
Abec 7P
0 to -5 5 4 4 4
ISO P2
0 to -2.5 2.5 1.5 1.5 1.5
Abec 9
0 to -2.5 2.5 1.25 1.25 1.25
Abec 9P
0 to -2.5 0.5 1.25 1.25 1.25

Tolerances for Outer Rings
Dimensions are in 0.001 mm (thousandths of a mm)

Outer Rings with an OD > 18 mm and <= 30 mm

Precision Grade Mean Outer Deviation Deltadmp Absolute Limit of Outside Diameter Deviation
Vdp
Width Deviation
DeltaCs
Max Side Deviation from Parallel
DeltaVCs
Track Parallel with Side
Sea
OD Square with Side
Sd
Eccentricity of Tracks
Kea
ISO P0
0 to -9 12 Based on Bore Size Tables Based on Bore Size Tables - - 15
Abec 1
0 to -10 11 - - 15
ISO P6
0 to -8 10 - - 9
Abec 3
0 to -7.5 10 - - 9
ISO P5
0 to -6 6 8 8 6
ISO P5A
0 to -6 3 8 8 6
Abec 5
0 to -5 6 7.5 7.5 5
Abec 5P
0 to -5 5 7.5 7.5 5
ISO P4
0 to -5 5 5 4 4
ISO P4A
0 to -5 2.5 5 4 4
Abec 7
0 to -5 5 5 4 4
Abec 7P
0 to -5 5 5 4 4
ISO P2
0 to -4 4 2.5 1.5 2.5
Abec 9
0 to -4 4 2.5 1.25 2.5
Abec 9P
0 to -4 0.8 2.5 1.25 2.5

Tolerances for Outer Rings
Dimensions are in 0.001 mm (thousandths of a mm)

Outer Rings with an OD > 30 mm and <= 50 mm

Precision Grade Mean Outer Deviation Deltadmp Absolute Limit of Outside Diameter Deviation
Vdp
Width Deviation
DeltaCs
Max Side Deviation from Parallel
DeltaVCs
Track Parallel with Side
Sea
OD Square with Side
Sd
Eccentricity of Tracks
Kea
ISO P0
0 to -11 14 Based on Bore Size Tables Based on Bore Size Tables - - 20
Abec 1
0 to -11 14 - - 20
ISO P6
0 to -9 14 - - 10
Abec 3
0 to -9 14 - - 10
ISO P5
0 to -7 7 8 8 7
Abec 5
0 to -7.5 7.5 7.5 7.5 7.5
Abec 5P
0 to -5 5 7.5 7.5 5
ISO P4
0 to -6 6 5 4 5
Abec 7
0 to -6 6 5 4 5
Abec 7P
0 to -5 5 5 4 4
ISO P2
0 to -4 4 2.5 1.5 2.5
Abec 9
0 to -4 4 2.5 1.25 2.5
Abec 9P
0 to -4 - 2.5 1.25 2.5

Tolerances for Outer Rings
Dimensions are in 0.001 mm (thousandths of a mm)

Outer Rings with an OD > 50 mm and <= 80 mm

Precision Grade Mean Outer Deviation Deltadmp Absolute Limit of Outside Diameter Deviation
Vdp
Width Deviation
DeltaCs
Max Side Deviation from Parallel
DeltaVCs
Track Parallel with Side
Sea
OD Square with Side
Sd
Eccentricity of Tracks
Kea
ISO P0
0 to -13 16 Based on Bore Size Tables Based on Bore Size Tables - - 25
Abec 1
0 to -13 17 - - 25
ISO P6
0 to -11 16 - - 13
Abec 3
0 to -11 16 - - 13
ISO P5
0 to -9 9 10 8 8
Abec 5
0 to -9 9 10 7.5 7.5
ISO P4
0 to -7 7 5 4 5
Abec 7
0 to -7.5 7.5 5 4 5
ISO P2
0 to -4 4 4 1.5 4
Abec 9
0 to -4 4 4 1.25 4

Tolerances for Outer Rings
Dimensions are in 0.001 mm (thousandths of a mm)

Outer Rings with an OD > 80 mm and <= 120 mm

Precision Grade Mean Outer Deviation Deltadmp Absolute Limit of Outside Diameter Deviation
Vdp
Width Deviation
DeltaCs
Max Side Deviation from Parallel
DeltaVCs
Track Parallel with Side
Sea
OD Square with Side
Sd
Eccentricity of Tracks
Kea
ISO P0
0 to -15 19 Based on Bore Size Tables Based on Bore Size Tables - - 35
Abec 1
0 to -16 19 - - 35
ISO P6
0 to -13 17 - - 18
Abec 3
0 to -13 17 - - 18
ISO P5
0 to -10 10 11 9 10
Abec 5
0 to -10 10 11 9 10
ISO P4
0 to -8 8 6 5 6
Abec 7
0 to -7.5 7.5 6 5 6
ISO P2
0 to -5 5 5 2.5 5
Abec 9
0 to -5 5 5 2.5 5

Log in and start browsing the Miniature Bearings and Small Parts Online Catalogue pages.

All care has been taken in the compilation of this page, however errors may occur. Please do not use the information contained herein for critical applications without first re-checking the information with an independent source. No responsibility will be accepted by Miniature Bearings and Small Parts or the Directors of said company for any loss of any kind that may be incurred in any way whatsoever from use of the information provided in these pages.

----- Trademarks -----
Delrin is a registered trademark of duPont Corporation
Teflon is a registered trademark of duPont Corporation
Viton is a registered trademark of duPont Corporation
Torlon is a registered trademark of BP Amoco

Tables and information on this web site should be read as a general guide only.
All relevant standards should be consulted to ensure the accuracy of information presented.



Main Pages

Click Page Banner Below

Top











Top



PRODUCTS

Site Summary

Freight Rates
Terms and Conditions
Privacy Policy

Miniature Bearings and Small Parts offers hundreds of thousands of products in thousands of categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within USA and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings and Small Parts is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Miniature Bearings and Small Parts 1997. All rights reserved.